Uploaded October 2016 | Updated November 2026, 18 hours ago
A solid bead of NaOH is dropped into a solution of Ammonium chloride. Ammonia forms as a gas. This is tested with a wet indicator paper showing a high pH value. Next a glass rod with some conc. HCl is held into the Ammonia stream where white clouds of Ammonium chloride form again.
This is a very classic Acid/Base reaction according to Bronsted. Many people think that having an Acid or a Base in a reaction automatically results in an Acid/Base reaction but this is not always the case. A real A-B-reaction involves the movement Protons. If metals react with an Acid electrons move, the acidic proton doesn't act as Acid here but as redox partner, otherwise a metal (M) would form M-H(+) in contact with an Acid (H+).
Now if we dissolve Ammonium chloride in water NH4(+) and Cl(-) Ions get solvated. If NaOH is added Na(+) and OH(-) are present as well. If NH4(+) as protonated species of NH3 meets OH(-) the deprotonated species of H2O they can react to NH3 and H2O. NH3 could dissolve in water forming NH4OH (Ammonia water) but as we set the conc. of water quite low the gaseous NH3 will leave the equilibrium and shift it towards the H2O and NaCl side.
Ammonia reacts on the surface of the wet pH Indicator paper with the H2O to form OH(-) Ions again turning it blue.
With HCl the reaction is reversed. HCl acts as an proton donor and NH3 as an acceptor forming NH4Cl again.
Not all Acids form these white clouds with Ammonia as the acids needs to be in the gas phase. Muriatic Acid is a solution of HCl gas and will always leak some HCl. We also tested this with HF a while ago (see another video). Nitric Acids forms a beautiful fog as well.
A solid bead of NaOH is dropped into a solution of Ammonium chloride. Ammonia forms as a gas. This is tested with a wet indicator paper showing a high pH value. Next a glass rod with some conc. HCl is held into the Ammonia stream where white clouds of Ammonium chloride form again.
This is a very classic Acid/Base reaction according to Bronsted. Many people think that having an Acid or a Base in a reaction automatically results in an Acid/Base reaction but this is not always the case. A real A-B-reaction involves the movement Protons. If metals react with an Acid electrons move, the acidic proton doesn't act as Acid here but as redox partner, otherwise a metal (M) would form M-H(+) in contact with an Acid (H+).
Now if we dissolve Ammonium chloride in water NH4(+) and Cl(-) Ions get solvated. If NaOH is added Na(+) and OH(-) are present as well. If NH4(+) as protonated species of NH3 meets OH(-) the deprotonated species of H2O they can react to NH3 and H2O. NH3 could dissolve in water forming NH4OH (Ammonia water) but as we set the conc. of water quite low the gaseous NH3 will leave the equilibrium and shift it towards the H2O and NaCl side.
Ammonia reacts on the surface of the wet pH Indicator paper with the H2O to form OH(-) Ions again turning it blue.
With HCl the reaction is reversed. HCl acts as an proton donor and NH3 as an acceptor forming NH4Cl again.
Not all Acids form these white clouds with Ammonia as the acids needs to be in the gas phase. Muriatic Acid is a solution of HCl gas and will always leak some HCl. We also tested this with HF a while ago (see another video). Nitric Acids forms a beautiful fog as well.
![K3[V(CN)5NO] (???)
Well...to be honest we do not know what this is either!
Much like Sodium Nitroprusside other elements form Pentacyano-Nitrosyl-Metallates, too. For this often, Hydroxylamine is used together with Cyanide on the metal solution.
We found a text saying that Vanadium(V) would react with Hydroxylamine and KCN at 100°C to form an orange compound. As we only had Hydroxylamine-Hydrochloride we still gave it a chance.
Ammoniummetavanadate, KCN and Hydroxylamine-Hydrochloride were dissolved in water and boiled for some seconds. The colour changed to an orange as mentioned in the literature and a brown gas is liberated, probably Nitrous Oxides.
The problem with these type of compounds are that all of them were collected in books around the same time and have been copied since then. Today we know for example that the brown ring test contains no Iron(I) but Iron(III) and a NO(+). The same thing applies for those Pentacyanonitrosyl-Metallates. Many books automatically assume they have to be in an oxidation state +1.
This Vanadium compound was originally published to be V(-1), yes a stable -1 Metal but newer studies show it’s in fact a K3[V(CN)5(NO)]. We think many of these compounds have to be checked again, which is why we usually do not mention them. This is an exception as there is not much Vanadium chemistry you can easily do and this reaction worked so well.
We tried it again with Cyanide and Vanadate only and it would not change colours! K3[V(CN)5NO] (???)](https://i.ytimg.com/vi/IVpv_x22QAE/mqdefault.jpg)

![Phosphorus Chemistry: PBr5 formation
In this video we will try to make Phosphorus Bromides. As we dont want to isolate elemental Bromine for this reaction we thought of making a tiny amount in a test tube and use the vapors in the upper half of the tube as our source of pure bromine. Therefore we added some red Phosphorus to the tip of a glass pipette and hung it in the vapors.
Part one of the video is the synthesis of Bromine. Potassium Bromide is placed in a test tube and 3% Hydrogen Peroxide is added. To this conc. Sulfuric Acid is dropped. Now many say the Acid will displace HBr which is oxidized by Peroxide but I try to stay closer to the actual redox reaction.
H2O2 + 2 H3O(+) + 2 e(-) to 4 H2O
As you can see H3O(+) or H(+) if you shorten the equation is required to compensate the extra Oxides. These redox reactions, much like the Chromate and Permanganate redox reactions depend on pH values. And a bit of acid is required to reach this high redox potential which allows Bromides to be oxidized to Bromine. Using conc. H2SO4 alone would work as well since it is quite oxidizing and does a similar effect. Here I use the conc. acid since the heat of dilution with the 97% water of the peroxide will heat the mixture up and Bromine starts to boil off.
The second part of the reaction is the Bromination:
First 2 P + 3 Br2 form 2 PBr3 this is liquid and the formation is really exothermic which causes the phosphorus to ignite in the first try. So we probably formed a lot of Oxides as well in this process.
If PBr3 is the desired product an excess of Phosphorus is required to make sure it wont be further brominated. PBr3 can then react with an additional Br2 to form PBr5 which is a solid compound and probably the yellow stuff you can see at the end in the pipette. PBr5 has a quite interesting structure as one would suspect a trigonal bipyramid with a serious Berry-Pseudo Rotation it actually forms [PBr4][Br] structures which can be formulated as Bond-No-Bond-structures much like Polyiodides have them.
Upon further reaction compound like PBr7 might form as well. Those will have Polybromides to avoid a too high coordination on the Phosphorus.
What you can see is first the formation of Bromine vapors, then the reaction and ignition of Phosphorus with Bromine and later some red Phosphorus in an Bromine atmosphere which will upon reaction slowly discolor the gas phase as the Bromine is consumed by the reaction. Phosphorus Chemistry: PBr5 formation](https://i.ytimg.com/vi/J6Xj_lEbj9M/mqdefault.jpg)
 complex. As Ag(I) prefers linear coordinations and we know Ag-N bonds from the soluble Diammine complex for example or Ag-NO3 as soluble compound the Ag-NO2 complex seems plausible. SIlver Chemistry: Silver Nitrite and Dinitroargentate(I)](https://i.ytimg.com/vi/JFjYBJkZSZc/mqdefault.jpg)
. As with almost all Pd(II) compounds the Iodopalladate(II) is a square-plane again.
At the end I place my hand behind the glass so you can see that it actually turned transparent as the cam doesnt pick it up that well. Palladium Chemistry: Tetraiodopalladate(II)](https://i.ytimg.com/vi/JGVemyRbRJw/mqdefault.jpg)




 and [Cu(H2O)5](2+) once more water is present the color changes to blue which is why the solution becomes colorless. If we had reduced it at that time we might have been able to form Cassius gold which is purple.
The last question is why the yellow-green color is so intense while the water one is colorless. This has to do with two things. First the conc. becomes smaller as more water is added diluting the intensity and on the other hand if we assume [CuCl4](2-) forms this is a tetrahedral complex while [Cu(H2O)5](2+) is octahedral, with some Jahn-Teller distortion of course. Often tetrahedral complexes tend to be much more intense in color as they do not possess an inverse symmetry. The lack of inverse symmetry influences the parity of the t2 and e, the split orbital sets used for coordination chemistry.
Absorption of light on the matter goes with the change of the dipole moment which is an odd function. And by absorbing photons you excite electrons which then jump between two energy levels (t2 and e). Those can be odd or even in parity. The overall process is the product of all three meaning it is either odd or even while according to quantum mechanics the probability of something is the square of the integral of the total space. Integrating an odd function like x³ will always lead to zero making it impossible. Problem is that complexes with inverse symmetry like the octahedral ones have a t2g and eg so both lower and higher energy level have the same parity.
The reason why we usually still see some color is because the ligands that form the octahedron have some movement as well and they do not move all synched. So the perfect symmetry is destroyed making it colored again.
And the last reason why the yellow-green is just more intense might be because some of the NO-gases formed also dissolve in water and color it brown-orange. Adding more water dissolves it to Nitrous acid. Gold Chemistry: Gold in Aqua Regia](https://i.ytimg.com/vi/KyhEi8vIn8Y/mqdefault.jpg)
![Manganese Chemistry: Cyanomanganate(II/III) and K[Mn(CN)3]
1) Mn(II) added to conc. KCN solution, then air bubbled through
2) Mn(II) added to low concentration of KCN then air bubbled through.
Explanation will come soon ! Manganese Chemistry: Cyanomanganate(II/III) and K[Mn(CN)3]](https://i.ytimg.com/vi/L5HdES4gB1g/mqdefault.jpg)