Uploaded April 2017 | Updated November 2026, 3 days ago
According to literature RuO4 (Ru=8), [RuO4](-) (Ru=7) and [RuO4](2-) (Ru=6) will react with Borohydrides to form a dark blue RuO2.
In the video we added Sodium Borohydride (NaBH4) to an aqueous solution of RuO4, it immediately turned dark blue-black with gas evolution.
There are two characteristic dark insoluble Ruthenium compounds, the Ru(III)oxide and Ru(IV)oxide. The latter one is blue due to impurities with Ru(III) and Ru(II) (at least this is the common explanation) so it might be a mixture of more than one oxidation state including Ru(III) and Ru(IV)…pretty much the same as the commercial chloride with a higher oxygen concentration.
As we will also try to make Ru2O3 soon we will accept this compound here to be RuO2. It will crystallize in a so called Rutile-structure, one of the more common ways MO2 compounds can crystallize.
According to literature RuO4 (Ru=8), [RuO4](-) (Ru=7) and [RuO4](2-) (Ru=6) will react with Borohydrides to form a dark blue RuO2.
In the video we added Sodium Borohydride (NaBH4) to an aqueous solution of RuO4, it immediately turned dark blue-black with gas evolution.
There are two characteristic dark insoluble Ruthenium compounds, the Ru(III)oxide and Ru(IV)oxide. The latter one is blue due to impurities with Ru(III) and Ru(II) (at least this is the common explanation) so it might be a mixture of more than one oxidation state including Ru(III) and Ru(IV)…pretty much the same as the commercial chloride with a higher oxygen concentration.
As we will also try to make Ru2O3 soon we will accept this compound here to be RuO2. It will crystallize in a so called Rutile-structure, one of the more common ways MO2 compounds can crystallize.





. If the right counter-ions are chosen it might even form a square planar geometry but CN=5 is preferred by Co(II), a [Co(CN)6](4-) hasnt been observed yet although it is mentioned in many books!
From this a dark red [Co2(CN)10](6-) Dimer forms with a Co-Co-Bond (much like in Ni(I)-Cyano-Complexes.
If this is oxidized by Oxygen a [(CN)5-Co-O-O-Co-(CN)5](6-) with a peroxo-bond inbetween the two centers. This is then further oxidized forming the yellow [Co(CN)6](3-).
Interesting enough, the [Co(CN)5](3-)-Ion can add a lot of stuff, like Oxygen, Hydrogen (forming a Hydride) and even Ethylene.
As we drop the solution into ethanol you can see that it is a yellow compound but the solution appears to be dark red. We are unsure what this dark red color is. Books mention the solution has to be boiled and more cyanide has to be added because hydrated Cyano-cobaltates(III) form as well but there is no color mentioned.
After a few hours the solution was bright yellow as seen on the end of the video. Cobalt Chemistry: Cyanocobaltates (II/III).](https://i.ytimg.com/vi/DFOOtfg0ruM/mqdefault.jpg)
![Thermochromism: Ag2[HgI4]
In this video, we heat another Tetraiodomercurate, in this case, Silver-Tetraiodomercurate.
When heated the structure changes from one, where Hg and Ag occupy tetrahedral sites of an Iodide-lattice to form a zinc-blende-type lattice, where the ions are distributed more randomly. This also reduces the band gap and causes the redshift of all the heavy metal-tetraiodomercurates.
The sudden jump from one phase to the other is due to blocking of the heavy and big Hg(II) for the Ag(I). Once a certain temperature is reached the Hg(II) moves as well and when it moves out of the Ag(I)s way it can pass and the next structure can form.
This higher agility of ions also causes the high temperatures forms to be better conductors than the room temperature ones.
For a better explanation on the lattices see our video on Cu2[HgI4]. Thermochromism: Ag2[HgI4]](https://i.ytimg.com/vi/DHyOrrUtUHY/mqdefault.jpg)

 which is light blue. If a base is added not pure Cu(OH)2 forms but a hydrated form of the composition close to [Cu(H2O)4(OH)2]. As more Ammonia is added [Cu(H2O)2(NH3)4](2+) forms which is dark blue.
The reason why Copper(II) compounds tend to be more intensively colored than other transition metals is that due to the d9 situation in Cu(II) a so called Jahn-Teller effect happens (we will have a video on this soon). The Jahn-Teller distortion gives rise to different transitions. This might explain the difference to for example Nickel or Cobalt, but why is the Ammonia-complex even more colored ? Because it consists of [Cu(NH3)4](2+) which is further complexed by 2 H2O which are due to Jahn-Teller far away in the axial position. So the Cu(II) sees mostly Ammonia which is square planar around it. As you might remember from our Nickel-Cyanide video, while [Ni(H2O)6](2+) was quite weak the orange color of [Ni(CN)4](2-) which was square planar as well was really intense although the conc. of Nickel did not change.
At really high Ammonia conc. a Hexamminecopper(II) can also form. Copper Chemistry: Tetramminecoppersulfate](https://i.ytimg.com/vi/E8wx-XDwSFw/mqdefault.jpg)

