Uploaded September 2016 | Updated November 2026, 3 days ago
If gray Arsenic is heated it will sublimate (under pressure it will also melt) forming a yellow gas. At around 800°C this gas consists of As4 molecules, at 1700°C As2 forms and at even higher temperatures atomic As forms.
If this is cooled on warm surfaces like the hot glass walls black and shiny black Arsenic forms. If it is cooled using liquid gases yellow Arsenic may form.
Besides the yellow gas form of Arsenic brown smoke can be seen as well. I am not sure if these are bigger As-molecules in the gas phase or, as natural Arsenic was used maybe contamination like Sulfides. There is also a brown, smelly suboxide in literature (the compound smells like Phosphine). Yet it resublimates quite well to the shiny black Arsenic on the glass walls so I suppose the amount of the suboxide is quite low.
If gray Arsenic is heated it will sublimate (under pressure it will also melt) forming a yellow gas. At around 800°C this gas consists of As4 molecules, at 1700°C As2 forms and at even higher temperatures atomic As forms.
If this is cooled on warm surfaces like the hot glass walls black and shiny black Arsenic forms. If it is cooled using liquid gases yellow Arsenic may form.
Besides the yellow gas form of Arsenic brown smoke can be seen as well. I am not sure if these are bigger As-molecules in the gas phase or, as natural Arsenic was used maybe contamination like Sulfides. There is also a brown, smelly suboxide in literature (the compound smells like Phosphine). Yet it resublimates quite well to the shiny black Arsenic on the glass walls so I suppose the amount of the suboxide is quite low.
![Palladium Chemistry: Palladium Nitrate
In this video, we dissolve some elemental Palladium in conc. Nitric Acid. Palladium is somewhat similar to silver in its reactivity although it forms less passive layers which makes it soluble in HCl as well much in comparison to Silver.
If HNO3 is added a Nitrate forms which is best described as [Pd(NO3)2(H2O)2].The square plane geometry is favored in many Palladium(II) complexes which is why we only get a coordination number of 4 here.
These crystals, however, are only soluble in dilute Nitric acid. Now you might say could this be the only Nitrate which is insoluble? As usually all Nitrates are soluble and the answer is no. We have a sample of pure Bismuth Nitrate and when you add it to water it forms a lot of precipitates as well. What both do is they decompose and slowly hydrolyze in water.
The next question is what is the oxidation state here? As Pd(II) and Pd(IV) exist it isnt easy to tell what forms here. According to literature, it is the Pd(II) compound. In aqua regia, however, Pd(IV) is said to form. Same for the Chloride. We used H2O2 do accelerate the dissolution but Pd(II)Chloride and H2O2 also forms Pd(IV) so you have to be careful here. Palladium Chemistry: Palladium Nitrate](https://i.ytimg.com/vi/8nMg0x2u_h0/mqdefault.jpg)
![Mercury Chemistry: Hg2[CrO4] disproportionation in KCN
In this video, we will react the Hg2[CrO4] we made in the previous video with an excess of KCN. As we have already shown in our video on the reaction of HgO with Prussian blue the mercury likes to form a cyanide complex. So we expect something like Mercury(I)cyanide to be forming. This compound, however, is unstable and quickly disproportionates to form elemental mercury and Hg(CN)2. You can see the black Hg particles sink to the bottom of the tube. Mercury Chemistry: Hg2[CrO4] disproportionation in KCN](https://i.ytimg.com/vi/8wHnn8GNKaY/mqdefault.jpg)


We do a lot of Nickel complex chemistry. For this we already prepared some reactants. One is the commercial green Nickel(II)Chloride Hexahydrate which is shown at the beginning of the video. We dried this to make the anhydrous yellow Nickel(II)Chloride as well. If weak Ni(2+) solutions are required we also have a Nickel(II)Chloride solution (as it takes some while for the NiCl2 to dissolve in water).
The question is, how would the solution look like if we added some of the anhydrous yellow powder to conc. HCl ? We already showed this for Cobalt and Copper. So we expect a yellow solution here. For comparison we left the aqua complex next to the vial containing the anhydrous NiCl2 and added the acid.
A yellow solution formed. This contains the tetrahedrally coordinated [NiCl4](2-) which is also the third coordination shape for Nickel.
The green Aqua complex is an octahedron and the orange [Ni(CN)4](2-) complex was square planar.
Another way to show this would be to dissolve it in Ethanol. Now some literature suggests that ethanolic solutions of anhydrous d-Metal Chlorides for example contain the pure [MClx](y-) but other books mention that Ethanol can indeed act as ligand as well. Nickel Chemistry: [NiCl4](2-)](https://i.ytimg.com/vi/990OfUkmNL0/mqdefault.jpg)




 (Ru=7) and [RuO4](2-) (Ru=6) will react with Borohydrides to form a dark blue RuO2.
In the video we added Sodium Borohydride (NaBH4) to an aqueous solution of RuO4, it immediately turned dark blue-black with gas evolution.
There are two characteristic dark insoluble Ruthenium compounds, the Ru(III)oxide and Ru(IV)oxide. The latter one is blue due to impurities with Ru(III) and Ru(II) (at least this is the common explanation) so it might be a mixture of more than one oxidation state including Ru(III) and Ru(IV)…pretty much the same as the commercial chloride with a higher oxygen concentration.
As we will also try to make Ru2O3 soon we will accept this compound here to be RuO2. It will crystallize in a so called Rutile-structure, one of the more common ways MO2 compounds can crystallize. Ruthenium Chemistry: RuO4 + NaBH4 (RuO2) (?)](https://i.ytimg.com/vi/CDx7rmq49SM/mqdefault.jpg)

