Uploaded May 2017 | Updated November 2026, 3 days ago
We showed you Diborane already and proofed it with a green flame. Then we also showed you Arsine and proofed it with a blue flame. We also used LiAlH4 and possible AlH3. Now we want to go a step further:
Does that mean that we will always be able to make MHx compounds? And the answer is now. In this video, we react NaBH4 with Thallium nitrate. A gas is produced but as we burn it it is red (looks orange on cam). And Thallium flames are green.
Even if you check that in the literature Thalliumhydride has only been made in very small samples and is nothing that would form here.
What we think happening is, that the Thallium is being reduced by the Hydride to form elemental Thallium which is there as a black-grey suspension in water. If you have any other information on a side product that might form between Tl(I) and Borates or Boranes feel free to inform us.
The red flame is likely Hydrogen. There are some discussions on the color of a hydrogen flame depending on the conc. of Oxygen and other compounds being present hydrogen is said to have multiple flame colors which is why we won't further discuss that here.
We showed you Diborane already and proofed it with a green flame. Then we also showed you Arsine and proofed it with a blue flame. We also used LiAlH4 and possible AlH3. Now we want to go a step further:
Does that mean that we will always be able to make MHx compounds? And the answer is now. In this video, we react NaBH4 with Thallium nitrate. A gas is produced but as we burn it it is red (looks orange on cam). And Thallium flames are green.
Even if you check that in the literature Thalliumhydride has only been made in very small samples and is nothing that would form here.
What we think happening is, that the Thallium is being reduced by the Hydride to form elemental Thallium which is there as a black-grey suspension in water. If you have any other information on a side product that might form between Tl(I) and Borates or Boranes feel free to inform us.
The red flame is likely Hydrogen. There are some discussions on the color of a hydrogen flame depending on the conc. of Oxygen and other compounds being present hydrogen is said to have multiple flame colors which is why we won't further discuss that here.



 (Ru=7) and [RuO4](2-) (Ru=6) will react with Borohydrides to form a dark blue RuO2.
In the video we added Sodium Borohydride (NaBH4) to an aqueous solution of RuO4, it immediately turned dark blue-black with gas evolution.
There are two characteristic dark insoluble Ruthenium compounds, the Ru(III)oxide and Ru(IV)oxide. The latter one is blue due to impurities with Ru(III) and Ru(II) (at least this is the common explanation) so it might be a mixture of more than one oxidation state including Ru(III) and Ru(IV)…pretty much the same as the commercial chloride with a higher oxygen concentration.
As we will also try to make Ru2O3 soon we will accept this compound here to be RuO2. It will crystallize in a so called Rutile-structure, one of the more common ways MO2 compounds can crystallize. Ruthenium Chemistry: RuO4 + NaBH4 (RuO2) (?)](https://i.ytimg.com/vi/CDx7rmq49SM/mqdefault.jpg)





. If the right counter-ions are chosen it might even form a square planar geometry but CN=5 is preferred by Co(II), a [Co(CN)6](4-) hasnt been observed yet although it is mentioned in many books!
From this a dark red [Co2(CN)10](6-) Dimer forms with a Co-Co-Bond (much like in Ni(I)-Cyano-Complexes.
If this is oxidized by Oxygen a [(CN)5-Co-O-O-Co-(CN)5](6-) with a peroxo-bond inbetween the two centers. This is then further oxidized forming the yellow [Co(CN)6](3-).
Interesting enough, the [Co(CN)5](3-)-Ion can add a lot of stuff, like Oxygen, Hydrogen (forming a Hydride) and even Ethylene.
As we drop the solution into ethanol you can see that it is a yellow compound but the solution appears to be dark red. We are unsure what this dark red color is. Books mention the solution has to be boiled and more cyanide has to be added because hydrated Cyano-cobaltates(III) form as well but there is no color mentioned.
After a few hours the solution was bright yellow as seen on the end of the video. Cobalt Chemistry: Cyanocobaltates (II/III).](https://i.ytimg.com/vi/DFOOtfg0ruM/mqdefault.jpg)
![Thermochromism: Ag2[HgI4]
In this video, we heat another Tetraiodomercurate, in this case, Silver-Tetraiodomercurate.
When heated the structure changes from one, where Hg and Ag occupy tetrahedral sites of an Iodide-lattice to form a zinc-blende-type lattice, where the ions are distributed more randomly. This also reduces the band gap and causes the redshift of all the heavy metal-tetraiodomercurates.
The sudden jump from one phase to the other is due to blocking of the heavy and big Hg(II) for the Ag(I). Once a certain temperature is reached the Hg(II) moves as well and when it moves out of the Ag(I)s way it can pass and the next structure can form.
This higher agility of ions also causes the high temperatures forms to be better conductors than the room temperature ones.
For a better explanation on the lattices see our video on Cu2[HgI4]. Thermochromism: Ag2[HgI4]](https://i.ytimg.com/vi/DHyOrrUtUHY/mqdefault.jpg)