Uploaded November 2020 | Updated September 2026, 1 week ago
In this video I will show you how to make a modular work light / task light system based off of dollar store LED light panels and a Milwaukee M12 tool battery. The concept is to have a lighting system that is flexible and versatile where you can add or remove light panels as required, aim them in different directions, adjust their individual brightness and mount the assembly in different configurations.
The system is powered by the Milwaukee M12 tool battery and clips into the base component of the light. The base can also slip into the spring loaded stabilizer to increase the stability of the lighting system when being used as a tower light.
Red status LEDs light up the connection points to show there is adequate power to the system and it is ready for use.
As an added bonus, the dollar store lights also yielded some small COB LED panels that were combined to build a flashlight attachment that also works great!
The video takes you through the design and assembly of each of the components in detail so that you can build your own. All of the 3D printable files and design resources are located on my Thingiverse page or GrabCAD page:
► thingiverse.com/thing:4663370
► grabcad.com/library/modular-led-work-light-system-for-milwaukee-m12-battery-1
The hardware required for this project is as follows:
► 4 x 1/2" pan head thread forming screws
► 4 x 1/4" pan head thread forming screws
► 4 x 1/4" flat head thread forming screws
► 6 x 3/4" pan head thread forming screws
► 8-32 x 1/2" flat head screw
► 5/16 - 18 x 3/8" flat head screw
► 8-32 ball nose plunger McMaster Carr part: 3408A104
► Rectangular Magnet McMaster Carr part: 5848K670
► Round Magnet McMaster Carr part: 5862K225
Electronic Components:
► Mill-Max 825-22-003-10-001101
► 56ohm 1/4W resistors
► 2.2ohm 2W resistors
► 4 - 5ohm 1/4W resistors
► TLPP5600 LEDs
Custom PCB design files can also be found on my Thingiverse page for download. I highly recommend you check it out.
#DIY #LED #MILWAUKEE
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embraceracing 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
Car Content:
► Mighty Car Mods
youtube.com/channel/UCgJRL30YS6XFxq9Ga8W2J3A
► Drivetribe
youtube.com/channel/UChiwLDIBJrV5SxqdixMHm
In this video I will show you how to make a modular work light / task light system based off of dollar store LED light panels and a Milwaukee M12 tool battery. The concept is to have a lighting system that is flexible and versatile where you can add or remove light panels as required, aim them in different directions, adjust their individual brightness and mount the assembly in different configurations.
The system is powered by the Milwaukee M12 tool battery and clips into the base component of the light. The base can also slip into the spring loaded stabilizer to increase the stability of the lighting system when being used as a tower light.
Red status LEDs light up the connection points to show there is adequate power to the system and it is ready for use.
As an added bonus, the dollar store lights also yielded some small COB LED panels that were combined to build a flashlight attachment that also works great!
The video takes you through the design and assembly of each of the components in detail so that you can build your own. All of the 3D printable files and design resources are located on my Thingiverse page or GrabCAD page:
► thingiverse.com/thing:4663370
► grabcad.com/library/modular-led-work-light-system-for-milwaukee-m12-battery-1
The hardware required for this project is as follows:
► 4 x 1/2" pan head thread forming screws
► 4 x 1/4" pan head thread forming screws
► 4 x 1/4" flat head thread forming screws
► 6 x 3/4" pan head thread forming screws
► 8-32 x 1/2" flat head screw
► 5/16 - 18 x 3/8" flat head screw
► 8-32 ball nose plunger McMaster Carr part: 3408A104
► Rectangular Magnet McMaster Carr part: 5848K670
► Round Magnet McMaster Carr part: 5862K225
Electronic Components:
► Mill-Max 825-22-003-10-001101
► 56ohm 1/4W resistors
► 2.2ohm 2W resistors
► 4 - 5ohm 1/4W resistors
► TLPP5600 LEDs
Custom PCB design files can also be found on my Thingiverse page for download. I highly recommend you check it out.
#DIY #LED #MILWAUKEE
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embraceracing 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
Car Content:
► Mighty Car Mods
youtube.com/channel/UCgJRL30YS6XFxq9Ga8W2J3A
► Drivetribe
youtube.com/channel/UChiwLDIBJrV5SxqdixMHm
