Uploaded February 2021 | Updated September 2026, 1 week ago
In this video I will show you the best tool I've found for crimping JST, Molex, Dupont and other similar style terminals. I have yet to have one of these connections fail using this crimper and the best part is that it is cheap! It covers many styles of terminals and is very versatile!
Because you can crimp the insulator and bare wire portion of the terminals individually, you can mix and match the crimping dies to any style terminal you need. Highly recommended!
Check out the link below for a very similar tool to the one I am using in the video. As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
Engineers Precision PA-09
► amzn.to/43BUl8Z
IWISS Mini Micro 2820 (Also Similar)
► amzn.to/3JfvHAJ
IWISS Mini Micro 3220 (Also Similar but with ratcheting mechanism)
► amzn.to/3oFjATZ
If you're in Canada, you can get it here for less:
► princessauto.com/en/8-in-wire-stripper-crimping-cutting-tool/product/PA0008731028
If you're in the US, search around on Harbor Freight for the same tool!
Also, keep watching in the video where I show you a little trick I use to avoid these common terminals from being over crimped with generic wire crimping tools.
Hope this video helps you guys and if you have any questions, feel free to ask them in the comments section below!
Thanks for watching!
#DIY #WIRING #ELECTRICAL
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
In this video I will show you the best tool I've found for crimping JST, Molex, Dupont and other similar style terminals. I have yet to have one of these connections fail using this crimper and the best part is that it is cheap! It covers many styles of terminals and is very versatile!
Because you can crimp the insulator and bare wire portion of the terminals individually, you can mix and match the crimping dies to any style terminal you need. Highly recommended!
Check out the link below for a very similar tool to the one I am using in the video. As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
Engineers Precision PA-09
► amzn.to/43BUl8Z
IWISS Mini Micro 2820 (Also Similar)
► amzn.to/3JfvHAJ
IWISS Mini Micro 3220 (Also Similar but with ratcheting mechanism)
► amzn.to/3oFjATZ
If you're in Canada, you can get it here for less:
► princessauto.com/en/8-in-wire-stripper-crimping-cutting-tool/product/PA0008731028
If you're in the US, search around on Harbor Freight for the same tool!
Also, keep watching in the video where I show you a little trick I use to avoid these common terminals from being over crimped with generic wire crimping tools.
Hope this video helps you guys and if you have any questions, feel free to ask them in the comments section below!
Thanks for watching!
#DIY #WIRING #ELECTRICAL
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
