Uploaded September 2016 | Updated November 2026, 3 days ago
A solution of Bismuth Nitrate is prepared. To this a small amount of Sodium Iodide is added. A black precipitate of insoluble Bi(III)-Iodide forms. As more Iodide is added it redissolves forming the orange and soluble [BiI4](-).
Now don't assume the polyhedron to a tetrahedron or square plane right away. For main group elements such as Lead and Bismuth it may be a bit more complicated. As Bi(III) and Bi(V) exist Bi(III) must automatically have a sort of lone pair which counts ad ligand as well. For [BiI4](-) the topic is even harder than one might expect:
Tetraiodobismuthate is what we call a hypervalent compound. It has too many electrons. What happens is that for the fourth bond to an Iodide a antibonding sigma-Orbital (formed by the Bi-Iodide-bond) is used. Basically BiI3 is a Lewis Acid although it has a lone pair. And as Lewis Acid it can react with the Lewis Base Iodide to form a complex. This is why the lone pair on the BIsmuth is not used and still present afterward making the Polyhedron a trigonal bipyramid which probably undergoes a Pseudo-Rotation as well. But as all valence-orbitals are filled and the 6d-Orbitals are too far away the Iodide would have to use the 7s-Orbital which does not happen. Instead it uses the antibonding-sigma-Orbital of the Bi-I-Bonds.
A solution of Bismuth Nitrate is prepared. To this a small amount of Sodium Iodide is added. A black precipitate of insoluble Bi(III)-Iodide forms. As more Iodide is added it redissolves forming the orange and soluble [BiI4](-).
Now don't assume the polyhedron to a tetrahedron or square plane right away. For main group elements such as Lead and Bismuth it may be a bit more complicated. As Bi(III) and Bi(V) exist Bi(III) must automatically have a sort of lone pair which counts ad ligand as well. For [BiI4](-) the topic is even harder than one might expect:
Tetraiodobismuthate is what we call a hypervalent compound. It has too many electrons. What happens is that for the fourth bond to an Iodide a antibonding sigma-Orbital (formed by the Bi-Iodide-bond) is used. Basically BiI3 is a Lewis Acid although it has a lone pair. And as Lewis Acid it can react with the Lewis Base Iodide to form a complex. This is why the lone pair on the BIsmuth is not used and still present afterward making the Polyhedron a trigonal bipyramid which probably undergoes a Pseudo-Rotation as well. But as all valence-orbitals are filled and the 6d-Orbitals are too far away the Iodide would have to use the 7s-Orbital which does not happen. Instead it uses the antibonding-sigma-Orbital of the Bi-I-Bonds.
![Platinum Chemistry: Pt in Aqua Regia
While looking for the bottle of tellurium we found an old bottle with Platinum foil in our element collection. So we decided to test it out and dissolve some in Aqua Regia.
The Platinum dissolves to form H2[PtCl6]. Platinum Chemistry: Pt in Aqua Regia](https://i.ytimg.com/vi/79NHMA8rsL0/mqdefault.jpg)
 + 4 H2O to [B(OH)4](-) + 4 H2
So the BH3 usually doesnt escape the reaction but reacts. You can also draw this like in organic chemistry using electron paths as arrows, attack the positively charged Boron in the centre much like a carbon, and then you see that the OH already sticks to the B and the Hydrides arent simply kicked off.
Now if H2SO4 or H3PO4 as highly concentrated acids are used there is not much water that can attack the Boron so it will end in a simple hydride transfer until it reaches a point where the product can escape the reaction. Both acids usually do not coordinate that well. So BH4(-) is BH3 + H(-) because BH3 is a more or less stable structure (B2H6 is but lets say this ratio of B to H is stable) the Hydride is just more H(-) pushed onto this system. What we do in this experiment is to take it away again and free the BH3. BH3 however as all Boron compounds is a electron deficiency compound having a sextet instead of an octet only. Therefore, the more stable Diborane B2H6 is formed.
We will not talk about the structure in details because the space is too limited here but if you have time check out how B and Al handle this problem its quite interesting.
Now what happens to the H3PO4(-)? Well if you use H2SO4 it also gets reduced to SO2 and H2S in this reaction while literature says nothing about a P(III) compound. Still we believe that some P(V) might as well get reduced in this reaction, too. Boron Chemistry: Diborane from NaBH4](https://i.ytimg.com/vi/7Pk7EUDAdp4/mqdefault.jpg)

![Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)
We had several ideas to make blue Cr(II) from Cr(III). One was to reduce it using nascent Hydrogen again. So we added some HCl to a CrCl3 solution and with the help of some aluminum and 2h of reaction time we got a gray solution which did not form the expected red compound with Sodium Acetate.
Now after some literature research we found out that Cr(II) can react with acids as well forming Cr(III) again and even if we had succeeded in making the red Cr(II)-Acetate, it would dissolve in HCl.
As we didnt know this fact when we were still in the lab we decided to use the strongest reducing agent we had, elemental Lithium. So instead of Aluminum foil we would wrap a small sheet of Lithium foil around the end of pipette and dip it into the CrCl3 solution. As LiOH formed, Cr(OH)3 precipitated. So we acidified the solution again and ended up with the problem as mentioned above as acid was now present. In all of these cases we reached a gray-greenish solution which did not form any red compound with Acetate.
So we looked even further into literature and found out that Lithium Aluminum Hydride reacts with Cr(III) as well. We tried it but the reaction was too vigorous and only reacted on the water surface so we changed it for Sodium Borohydride.
So this is a week green solution of Cr(III) which is hopefully reduced by Sodium Borohydride to form the blue Cr(II). In the end we added this to Acetate and it would not react. Now it is said that these Cr(II) compounds are extremely oxophilic. Even small amounts of Oxygen can be enough to cover the red color of the acetate which might be a reason why we dont see it. Even though the Hydrogen pressure is quite high still enough oxygen might be present in the NaOAc solution to discolor the product.
As the color changed quite noticeably from green to a dark blue we assume at least some Cr(II) had formed.
There is also a way to make this compound from Cr(VI) and we will try this as well maybe it works better that way. Problem is that Chromium tends to do Hydrate-Isomerisms, it changes the Ligands, Counter-Ions and solvent molecules after some time or if the temperature is varied ( we will show this effect for Cr(III)Sulfate soon. So of course introducing some new compounds into the solution can also lead to different products, Cr(III) with Sulfate is blueish, Cr(III) with Chloride is green and if the aqua complex forms it becomes purple. So this might be an explanation for the blue color here as well.
Now space is a little limited here so we will explain the importance of the Acetate compound we were trying to make from Cr(II) Chloride in another video. If you have any suggestions on how we could isolate Cr(II) better let us know! Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)](https://i.ytimg.com/vi/850FcOTvpQU/mqdefault.jpg)

![Palladium Chemistry: Palladium Nitrate
In this video, we dissolve some elemental Palladium in conc. Nitric Acid. Palladium is somewhat similar to silver in its reactivity although it forms less passive layers which makes it soluble in HCl as well much in comparison to Silver.
If HNO3 is added a Nitrate forms which is best described as [Pd(NO3)2(H2O)2].The square plane geometry is favored in many Palladium(II) complexes which is why we only get a coordination number of 4 here.
These crystals, however, are only soluble in dilute Nitric acid. Now you might say could this be the only Nitrate which is insoluble? As usually all Nitrates are soluble and the answer is no. We have a sample of pure Bismuth Nitrate and when you add it to water it forms a lot of precipitates as well. What both do is they decompose and slowly hydrolyze in water.
The next question is what is the oxidation state here? As Pd(II) and Pd(IV) exist it isnt easy to tell what forms here. According to literature, it is the Pd(II) compound. In aqua regia, however, Pd(IV) is said to form. Same for the Chloride. We used H2O2 do accelerate the dissolution but Pd(II)Chloride and H2O2 also forms Pd(IV) so you have to be careful here. Palladium Chemistry: Palladium Nitrate](https://i.ytimg.com/vi/8nMg0x2u_h0/mqdefault.jpg)
![Mercury Chemistry: Hg2[CrO4] disproportionation in KCN
In this video, we will react the Hg2[CrO4] we made in the previous video with an excess of KCN. As we have already shown in our video on the reaction of HgO with Prussian blue the mercury likes to form a cyanide complex. So we expect something like Mercury(I)cyanide to be forming. This compound, however, is unstable and quickly disproportionates to form elemental mercury and Hg(CN)2. You can see the black Hg particles sink to the bottom of the tube. Mercury Chemistry: Hg2[CrO4] disproportionation in KCN](https://i.ytimg.com/vi/8wHnn8GNKaY/mqdefault.jpg)


We do a lot of Nickel complex chemistry. For this we already prepared some reactants. One is the commercial green Nickel(II)Chloride Hexahydrate which is shown at the beginning of the video. We dried this to make the anhydrous yellow Nickel(II)Chloride as well. If weak Ni(2+) solutions are required we also have a Nickel(II)Chloride solution (as it takes some while for the NiCl2 to dissolve in water).
The question is, how would the solution look like if we added some of the anhydrous yellow powder to conc. HCl ? We already showed this for Cobalt and Copper. So we expect a yellow solution here. For comparison we left the aqua complex next to the vial containing the anhydrous NiCl2 and added the acid.
A yellow solution formed. This contains the tetrahedrally coordinated [NiCl4](2-) which is also the third coordination shape for Nickel.
The green Aqua complex is an octahedron and the orange [Ni(CN)4](2-) complex was square planar.
Another way to show this would be to dissolve it in Ethanol. Now some literature suggests that ethanolic solutions of anhydrous d-Metal Chlorides for example contain the pure [MClx](y-) but other books mention that Ethanol can indeed act as ligand as well. Nickel Chemistry: [NiCl4](2-)](https://i.ytimg.com/vi/990OfUkmNL0/mqdefault.jpg)

