Uploaded January 2024 | Updated November 2026, 3 hours ago
Probably last test run with this setup to see where it struggles. Almost got stuck a couple times but managed to get out. All stock rig would have def got stuck beyond saving. Don't think there is much else I can do to give it more obstacle beating ability for a 1/10. Probably need a 1/8 or 1/6 to have a chance getting up full size steps etc.
I did a near identical run all stock but with the same Kaiju tires, and the point at which I tried going up those first couple wooden steps the ESC overheated from cogging too much. With the 2400Kv motor and 13T pinion I have the power now without overheating, but it just doesn't have the traction to get up the frozen wood.
Probably last test run with this setup to see where it struggles. Almost got stuck a couple times but managed to get out. All stock rig would have def got stuck beyond saving. Don't think there is much else I can do to give it more obstacle beating ability for a 1/10. Probably need a 1/8 or 1/6 to have a chance getting up full size steps etc.
I did a near identical run all stock but with the same Kaiju tires, and the point at which I tried going up those first couple wooden steps the ESC overheated from cogging too much. With the 2400Kv motor and 13T pinion I have the power now without overheating, but it just doesn't have the traction to get up the frozen wood.










