Another Plasma Donut Circuit @Magneticitist
Another Plasma Donut Circuit  @Magneticitist
Uploaded June 2024 | Updated November 2026, 3 hours ago
Just trying to make the donut on another HF oscillator circuit of mine since I didn't have any more knob capacitors like I thought. It had a much smaller diameter primary and was still even able to make the donut, but it was only a small one that hugged the windings. The fields were too small and concentrated. After making the coil wider it still made the donut but it was also a little too hot to run for long periods since I don't want to damage the glass. I can probably just try to tune the thing to run at less current but before that I might as well also play around with modulating it also.

While I don't want to make it seem easier than it actually is, I will say that I was able to get this one going without a lot of effort just like the first one.. but it did take a little more tweaking. It was difficult to maintain a donut on this one when increasing the primary inductance too much and leaving all other values the same. It likes about ~18mhz with a 100pf tank cap.
I've also got this copper strip on the gate running over with a 90 in it to the cap that also could be making a difference. I think at the time I first made it I was playing around with trying to shift the phase relation of the gate and drain voltages. I'm also using 1/8" copper tube for the other circuit and just solid 12awg on this one.
Another Plasma Donut CircuitH-Bridge Induction Heater & DRSSTC Driver OCP TestTyphon 3s FPV Wandering AroundQCW SSTC Double Full Bridge First TestBasic Arduino Nano Tesla Coil Interrupter V1 w/ Fiber Optic Link (SSTC/DRSSTC/Bluetooth Audio)Plasma Donut + PWM14Mhz Plasma Flame Build (for Plasma Toroid testing)RC FPV ARRMA Fireteam 4S DJI O4 Pro Tearing Up SnowQCWSSTC Box 16V (4S LiPo)Simple DIY Horn for RC Cars (NE555)RC FPV DJI O3 Air Unit w/RockSteady On Grass (no audio)H-Bridge Induction Heater Alu Nug ~600W
Magneticitist |

Another Plasma Donut Circuit

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER