Uploaded January 2026 | Updated September 2026, 1 week ago
Another Santa-sack of technical goodies from AliExpress for us to explore.
Here are some links to the items on AliExpress (not a sponsor).
These are affiliate links, but that will not affect the price you pay.
Keep in mind that these products may not meet your country's standards.
Some listings may not work for some countries and some may just be sold out or disappear.
Programmable "616" coin mech. This unit can be trained for several coins by feeding it samples of specific coins so it can create an inductive profile for that type of coin:-
https://s.click.aliexpress.com/e/_c3G5qE33
Illuminated RGB bezel for other coin mechs:-
https://s.click.aliexpress.com/e/_c3allDUh
Not-Lego smoke generator (ultrasonic atomiser):-
https://s.click.aliexpress.com/e/_c41yys0H
Lovely cyan "mars green" LED tape - it's a really nice turquoise colour:-
https://s.click.aliexpress.com/e/_c2wqoy37
Standard 2835 warm white LED tape:-
https://s.click.aliexpress.com/e/_c2wqoy37
Ridiculously cheap 5m roll of WS2812B 5V addressable LED tape (60 LEDs per metre IP30):-
https://s.click.aliexpress.com/e/_c4kYnTFr
Sanwa copy joystick (you can get optional movement restrictor plates):-
https://s.click.aliexpress.com/e/_c35HFTMD
Not Lego flat coloured disks:-
https://s.click.aliexpress.com/e/_c3zFllYD
10mm LED bulbs suitable for arcade buttons:-
https://s.click.aliexpress.com/e/_c2RYGJXB
Classic arcade illuminated button with microswitch:-
https://s.click.aliexpress.com/e/_c3w8NcG5
Non isolated 280mA LED driver:-
https://s.click.aliexpress.com/e/_c2QiNoID
Super-tiny 12V power supply of unknown actual rating and safety:-
https://s.click.aliexpress.com/e/_c4PSoyBj
If you enjoy my videos and would like to support me with a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also release Patreon-only backstage videos when I'm working on shows.
patreon.com/bigclive
Alternatively, for a single coffee contribution you can use PayPal:-
paypal.com/paypalme/bigclive
#ElectronicsCreators
Another Santa-sack of technical goodies from AliExpress for us to explore.
Here are some links to the items on AliExpress (not a sponsor).
These are affiliate links, but that will not affect the price you pay.
Keep in mind that these products may not meet your country's standards.
Some listings may not work for some countries and some may just be sold out or disappear.
Programmable "616" coin mech. This unit can be trained for several coins by feeding it samples of specific coins so it can create an inductive profile for that type of coin:-
https://s.click.aliexpress.com/e/_c3G5qE33
Illuminated RGB bezel for other coin mechs:-
https://s.click.aliexpress.com/e/_c3allDUh
Not-Lego smoke generator (ultrasonic atomiser):-
https://s.click.aliexpress.com/e/_c41yys0H
Lovely cyan "mars green" LED tape - it's a really nice turquoise colour:-
https://s.click.aliexpress.com/e/_c2wqoy37
Standard 2835 warm white LED tape:-
https://s.click.aliexpress.com/e/_c2wqoy37
Ridiculously cheap 5m roll of WS2812B 5V addressable LED tape (60 LEDs per metre IP30):-
https://s.click.aliexpress.com/e/_c4kYnTFr
Sanwa copy joystick (you can get optional movement restrictor plates):-
https://s.click.aliexpress.com/e/_c35HFTMD
Not Lego flat coloured disks:-
https://s.click.aliexpress.com/e/_c3zFllYD
10mm LED bulbs suitable for arcade buttons:-
https://s.click.aliexpress.com/e/_c2RYGJXB
Classic arcade illuminated button with microswitch:-
https://s.click.aliexpress.com/e/_c3w8NcG5
Non isolated 280mA LED driver:-
https://s.click.aliexpress.com/e/_c2QiNoID
Super-tiny 12V power supply of unknown actual rating and safety:-
https://s.click.aliexpress.com/e/_c4PSoyBj
If you enjoy my videos and would like to support me with a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also release Patreon-only backstage videos when I'm working on shows.
patreon.com/bigclive
Alternatively, for a single coffee contribution you can use PayPal:-
paypal.com/paypalme/bigclive
#ElectronicsCreators







![Making a laser lumia/aura effects disk - with a slight silicone disaster
The Lumia or Aura effect is created by shining a laser through rippled glass, but it can be difficult to find the right glass, and someone who can cut a circle from it for you. This was an experiment to use a standard filament based 3D printer to create a silicone mould for optically clear resin.
This was my first attempt at creating a mould with liquid silicone. Apparently platinum-cured silicone is very fussy about what its used with, and my master shape was fine on its own, but when pre-textured with UV cured resin it prevented the silicone from curing in that area and caused an outgassing effect. Even with ordinary two-part resin the silicone still stayed slightly sticky where it was in contact.
In the end the answer was to use the 3D printed PLA mould on its own and add the effects onto the cast resin disks afterwards.
When using UV curing resin I strongly recommend wearing gloves to protect your hands from contact with it. The chemicals used to make it light sensitive can also make your skin sensitive to sunlight.
This is an experimental device. I dont know how the resin will hold up to specific wavelengths of laser energy. Its also probably limited to low power lasers for safety. The disk can also be used with various styles of LEDs for an aurora borealis effect.
For laser use the disk should rotate very slowly to get the best optical warping effects.
Heres the OpenSCAD script that creates your custom mould for this project.
There are two adjustable variables - one for the outer diameter of the disk and one for the central hub where it attaches to a suitable motor. The script will automatically place a small central indent for aligning a drill if needed.
OpenSCAD can be downloaded for Windows, Linux and Mac (plus others) from the official site:-
https://openscad.org/
To use the script, copy and paste it into the left hand editor window in openscad. You can either adjust the two variables directly in the script or you can enable the customizer that will open a window to do it.
If you want to use the customizer then you can open it from the window drop down menu.
To see the results of any changes quickly, press the cube-button with two arrows on it. To do the full build press the cube-button with the hourglass on it, and when it is complete, save the file by pressing the STL button.
That will save a design file that can be used in your choice of slicer for 3D printing.
The script is below:-
//Ripple disk mould maker
//Diameter of disk in mm
dia=75;
//Diameter of central hub in mm
hub=20;
difference(){
cylinder(h=12,d=dia+12);
translate([0,0,1])
cylinder(h=12,d=dia+10);
}
difference(){
union(){
cylinder(h=5,d=dia);
cylinder(h=7,d=hub);
}
//Central drilling indent
translate([0,0,5.5])
cylinder(h=2,d1=0,d2=3);
}
$fn=100; Making a laser lumia/aura effects disk - with a slight silicone disaster](https://i.ytimg.com/vi/5yNYqsbBkJM/mqdefault.jpg)


