Uploaded December 2025 | Updated November 2026, 5 days ago
Another unbagging of random stuff I bought from AliExpress (not a sponsor). As requested, I'll itemise the items with links below.
Note that these links may already be sold out or not work in some countries. But they may be a good starting point. They are affiliate links, but that will not affect the normal price. If you buy something I get a few cents towards buying more gadgets for us to explore.
The illuminated USB-C inlets:-
https://s.click.aliexpress.com/e/_c3EqAB2h
The releasable cable ties:-
https://s.click.aliexpress.com/e/_c4k4Czrj
Glow in the dark gravel:-
https://s.click.aliexpress.com/e/_c4KNql7x
Live wire detector pen:-
https://s.click.aliexpress.com/e/_c3VPXvyH
USB-C connector with tiny lithium charge control circuit:-
https://s.click.aliexpress.com/e/_c3Q79YVL
Plug in air ioniser unit:-
https://s.click.aliexpress.com/e/_c4bcYwIN
60mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c2wZ7lVJ
Lego-style (much smaller grid) flower kit. I built it, it was quite fumbly but fun. The main listing for this has an option of a dome or not:-
https://s.click.aliexpress.com/e/_c454oyjf
Low profile white illuminated arcade button:-
https://s.click.aliexpress.com/e/_c4tfHebR
45mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c2yeSGuD
33mm illuminated white slot machine button:-
https://s.click.aliexpress.com/e/_c3qrCb73
100mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c4PjzJf3
USB humidifier with six illuminated sections:-
https://s.click.aliexpress.com/e/_c39EdppP
Pink USB humidifier:-
https://s.click.aliexpress.com/e/_c2QJ2a9F
Mushroom night light:-
https://s.click.aliexpress.com/e/_c3cKvaeH
Square night light:-
https://s.click.aliexpress.com/e/_c4tqrhjT
Ceramic tweezers (non magnetic):-
https://s.click.aliexpress.com/e/_c3kdQYil
If you enjoy my videos and would like to support me with a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also release Patreon-only backstage videos when I'm working on shows.
patreon.com/bigclive
Alternatively, for a single coffee contribution you can use PayPal:-
paypal.com/paypalme/bigclive
#ElectronicsCreators
Another unbagging of random stuff I bought from AliExpress (not a sponsor). As requested, I'll itemise the items with links below.
Note that these links may already be sold out or not work in some countries. But they may be a good starting point. They are affiliate links, but that will not affect the normal price. If you buy something I get a few cents towards buying more gadgets for us to explore.
The illuminated USB-C inlets:-
https://s.click.aliexpress.com/e/_c3EqAB2h
The releasable cable ties:-
https://s.click.aliexpress.com/e/_c4k4Czrj
Glow in the dark gravel:-
https://s.click.aliexpress.com/e/_c4KNql7x
Live wire detector pen:-
https://s.click.aliexpress.com/e/_c3VPXvyH
USB-C connector with tiny lithium charge control circuit:-
https://s.click.aliexpress.com/e/_c3Q79YVL
Plug in air ioniser unit:-
https://s.click.aliexpress.com/e/_c4bcYwIN
60mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c2wZ7lVJ
Lego-style (much smaller grid) flower kit. I built it, it was quite fumbly but fun. The main listing for this has an option of a dome or not:-
https://s.click.aliexpress.com/e/_c454oyjf
Low profile white illuminated arcade button:-
https://s.click.aliexpress.com/e/_c4tfHebR
45mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c2yeSGuD
33mm illuminated white slot machine button:-
https://s.click.aliexpress.com/e/_c3qrCb73
100mm illuminated slot machine button:-
https://s.click.aliexpress.com/e/_c4PjzJf3
USB humidifier with six illuminated sections:-
https://s.click.aliexpress.com/e/_c39EdppP
Pink USB humidifier:-
https://s.click.aliexpress.com/e/_c2QJ2a9F
Mushroom night light:-
https://s.click.aliexpress.com/e/_c3cKvaeH
Square night light:-
https://s.click.aliexpress.com/e/_c4tqrhjT
Ceramic tweezers (non magnetic):-
https://s.click.aliexpress.com/e/_c3kdQYil
If you enjoy my videos and would like to support me with a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also release Patreon-only backstage videos when I'm working on shows.
patreon.com/bigclive
Alternatively, for a single coffee contribution you can use PayPal:-
paypal.com/paypalme/bigclive
#ElectronicsCreators







![The LED candle project that went wrong (twice)
This project was supposed to be so easy. But a decision to add over-discharge protection backfired when I discovered that when the little DW01 lithium cell protection modules are powered up, they sometimes go into standby mode and can only be woken by charge current going into the cell.
I hadnt broken the wire on the LED (until I pulled it!). The module had just gone into standby mode.
On a plus note, the candle now has a USB-C charge port inside it for recharging the lithium cell.
I like to show my failures so you dont feel so bad when your own project goes wrong.
AliExpress has loads of flickering LEDs in all colours, but Ive not been able to find packs of the newer style subtle version yet.
Here are the scripts for making the candle parts. You can copy and paste them into OpenSCAD to get custom 3D printing files.
The base:-
//Candle base
//Base thickness
base=1.5;
//Base diameter
basedia=50;
//Insert height
height=7;
difference(){
union(){
//base plate
translate([0,0,0])
cylinder(h=base,d=basedia);
//insert
translate([0,0,base])
cylinder(h=height,d=23);
//reinforcing taper
translate([0,0,base])
cylinder(h=2,d1=25,d2=23);
}
//inner core
translate([0,0,1.5])
cylinder(h=10,d=21);
}
$fn=100;
The shaft sections:-
//stackable Candle shaft
//Height of main body
height=50;
difference(){
union(){
//Main body
translate([0,0,0])
cylinder(h=height,d=25);
//taper
translate([0,0,height])
cylinder(h=3,d1=25,d2=23);
//insert
translate([0,0,height+3])
cylinder(h=6,d=23);
}
//core
//Main body
translate([0,0,0])
cylinder(h=height,d=23);
//taper
translate([0,0,height])
cylinder(h=3,d1=23,d2=21);
//insert
translate([0,0,height+3])
cylinder(h=6,d=21);
}
$fn=100;
The flat top:-
//Flat candle cap
difference(){
union(){
//body
translate([0,0,0])
cylinder(h=6,d=25);
}
//core
translate([0,0,1])
cylinder(h=10,d=23);
//wick slot
translate([-1,-.5,-1])
cube([15,1,10]);
}
$fn=100;
The pointed top:-
//Pointed candle cap
difference(){
union(){
//body
translate([0,0,0])
cylinder(h=6,d=25);
//cone
translate([0,0,6])
cylinder(h=15,d1=25,d2=0);
}
//core
translate([0,0,-1])
cylinder(h=7,d=23);
translate([0,0,6])
cylinder(h=14,d1=23,d2=0);
//wick hole
translate([0,0,17])
cylinder(h=7,d=1.5);
//slot
translate([0,-.5,-1])
cube([15,1,22]);
}
$fn=100;
If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams.
https://www.patreon.com/bigclive
Alternatively, for a single coffee contribution you can use PayPal:-
https://www.paypal.com/paypalme/bigclive
#ElectronicsCreators The LED candle project that went wrong (twice)](https://i.ytimg.com/vi/7l--KgoTh50/mqdefault.jpg)


