80/20: R40 Track Mount Drop Stop (R40-DS) @8020llc

Uploaded April 2024 | Updated September 2026, 2 weeks ago

To Purchase: bit.ly/3JjCTg1
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

-Electric conductivity (ESD)
-Track mount with a 1 5/16" drop stopper
-Works with all Steel Roller Track Narrow

80/20: R40 Track Mount Drop Stop (R40-DS)

$80/20: Linear Motion Overview 80/20: Linear Motion Overview Find in Catalog: https://bit.ly/428g7iZ To Purchase: https://bit.ly/3LYp8oX Hello and welcome to 80/20’s product highlight series today we’re going to take a look at linear motion. These components are great for adding motion to any project. They are easy to install, come in a variety of styles, and are customizable. They’re available in both fractional and metric, and compatible across a wide range of profile series. The first type of linear motion component we want to talk about is our flanged style. These come preassembled with extra shims. They’re available in both single and double style. Our next style is UniBearing . This option is great for running two profiles parallel with each other. Now although these come preassembled, a bolt assembly will be needed. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now before you install this component, we want to point out that all of out bearing pads come self lubricating and with rounded edges. This is going to help ensure easy installation and smooth motion. Now to install this we are going to take our linear bearing, put one last bolt and washer in it, take our Tnut, preload it on there, and we want to make sure that your pilot projection is facing downwards or away from the bearing. From there, we’ll just line it up with the open Tslot, and slide it on. You’ll find the position that you want, take your wrench, and you’ll tighten down the bolts. Now once you have those tightened down, you can put your project into motion. Something else you may want to consider is the option of a brake. Our flanged styles come with and without brake holes. So if you decide to use a brake, take your linear bearing, feed a bolt from inside out, put a washer on the outside, and just tighten down your handle. Now it’s worth noting that our brake handles come in a variety of styles, as seen here. Now one other option you may want to consider is what type of bearing pad to use. We have our standard style, then we have our high-cycle style. This is perfect for using in heavy duty applications that have sudden starts and stops, and high cycle rates. Now the next type of linear motion we want to talk about is our UniBearing . It’s available in both single and double flanged options. They come preassembled with all recommended hardware included. Now when it comes to installing it, you’ll simply loosen up the center Tnut, slide your profile on, and you’ll tighten down the bolts on the other side. From there you can put it to use depending on if it’s a single or double style. Now the last thing we want to mention is our black anodize. All of our linear motion is now available in both clear and black anodize to suit your project’s needs. Now hopefully you found this segment on linear motion helpful, for more information please visit 8020.net and be sure to subscribe for future 80/20 videos, and as always make it a great day.$

80/20: 10 & 25 Series T-Matic Connector (14200)

$80/20: Door Glide Overview To Purchase: https://bit.ly/3MuoDSN Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we are going to take a look at door glides. These door glides allow two profiles to slide together with ease, perfect for bi-fold doors. They are easy to install, available in both fractional and metric, and compatible across a wide range of profile series. Now when it comes to using the door glide, machining will need to be done to one of your bars, with one end tap on one end. More information on 80/20’s machining services can be found in the 80/20 product catalog. Now when it comes to installing it, you’ll take the door glide, and simply thread it into the end tap. From there you’ll get it down flush with the end of the profile. Take your mating profile, and slide it right in. From there, you have a functioning door glide with nice smooth movement. Now hopefully you found this segment on door glides helpful. For more information, visit 8020.net, and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20 Ideabuilder®: Designing with Pipe and Joint

80/20: 1130mm Task Light with High Low Switch (21130)

$80/20: Stanchions Overview To Purchase: https://bit.ly/3BpAITY Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series today we’re going to take a look at stanchions. Stanchions are great for holding tubes, and round bars into place. They are unique to our fractional product line and great for applications such as camera mounts, sensors, and much more. Now our stanchions come in a variety of styles, we have single and double, offset and centered, horizontal and vertical, and our cross clamp. Regardless of your choice, a bolt assembly will be needed. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now when it comes to installing our stanchion, we’ll take our bolts and our washers, load them in there, and we’ll take our t-nut and put it on the end of our bolt. Now you want to make sure that the pilot projection on the Tnut is facing away from the stanchion. So we’ll take our stanchion, and simply slide it into the open Tslot. We’ll get into the desired location that we want, and we’ll tighten down our bolts. Now once we have that tightened down, we can put our tube in. We’ll take our wrench and we’ll tighten down the bolts on the side of the stanchion to hold our tube into place. Now one last stanchion we want to talk about is our cross clamp. Has a strong hold, but it’s adjustable. So any time you need to move a tube, simply loosen the brake, move it into a new location that you want, and tighten it back down. Now hopefully you found this segment on stanchions helpful, for more information please visit 8020.net and be sure to subscribe to future 80/20 videos, and as always make it a great day.$

80/20: 10 Series 10-32 Slide-in Economy T-Nut (3276)