80/20: 10 Series 10-32 Slide-in Economy T-Nut (3276) @8020llc

Uploaded November 2024 | Updated September 2026, 2 weeks ago

To Purchase: bit.ly/4eUCZbE
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

The slide-in economy T-nut with centered thread is a cost-effective fastening option available with options in size, material, thread, and finish. It loads from the profile ends and has a pilot thread projection that adds additional threading for increased strength. The centered thread of the slide-in economy T-nut lends itself to connections towards the middle of a profile or with a flat plate. This T-nut is available in a double or triple configuration. Tip: Position the pilot projection down in the T-slot to avoid an uneven connection or crashing.

80/20: 10 Series 10-32 Slide-in Economy T-Nut (3276)

80/20: 10 Series Slide-In Economy T-Nut Centered Thread (3785)

80/20: Flat Head Socket Cap Screw (3401)

$80/20: Slam Latch Overview To Purchase: https://bit.ly/42nvMdv Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at the slam latch. This latch is both secure, and able to be locked. It’s easy to install and is available in both fractional and metric. Now the great thing about this latch, is that it requires no machining. However, a bolt assembly will be required to install it. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now when it comes to installing the slam latch, both sides of it are going to install in the same way, so we got the handle side already installed. To install the latch side, we’re going to take one last bolt and feed it through, put one last T-nut on. Once we got that preloaded on, we’re going to drop it right into the T-slot. Get that in there, we’ll line it up with the handle side, we’ll snap it all into place, we’ll go ahead and hold that into place and grab our wrench and tighten it down. Now once we got that tightened into place, we’ve got a secure connection, but we’re going to add on a little extra security,. We’re going to add in these cover caps. Now once these are slid in and the whole handle is locked into place, you’re not going to be able to access your bolts. That’s going to give you added security for when you have it locked up. Now hopefully you found this segment on the slam latch helpful. For more information please visit 80/20.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.$ $80/20: Metal Hinge Overview 80/20: Metal Hinge Overview Find in Catalog: https://8020.net/bookshelf Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at standard metal hinges. These hinges are great for profile-to-profile connections. They’re easy to install and available in both fractional and metric. The standard metal hinges come in both black and bright zinc. It requires no machining to install, but does require a bolt assembly. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now to install it. We’re get our bars into place and grab our hinge. We’ll give it one last bolt and preload one last T-nut. Now the T-nut has a pilot projection on it that you’re going to want to face downwards or away from the hinge when you put it on. So we’ll slide that right on. And we’ll take half the hinge and slide it right into the open T-slot. We’ll grab the other bar and do the same thing. Now once we have those lined up and into position, we’ll take our wrench and tighten down each bolt. Now once we have all these tightened down, our hinge will be ready for use. Now hopefully you found this segment on the standard metal hinge helpful. For more information, please visit 80/20.net, and make sure to subscribe for future 80/20 videos. And always, make it a great day.$

AutoQuoter Solidworks: How to Generate a DWG (Drawing)

80/20s Latest Design Software: IdeaBuilder

80/20: R85 Track Mount Tab Stop (R85-TS)

8020 LLC (80/20) |

80/20: 10 Series 10-32 Slide-in Economy T-Nut (3276)