80/20: Door Glide Overview @8020llc

80/20: Door Glide Overview @8020llc

Uploaded February 2024 | Updated September 2026, 2 weeks ago

To Purchase: bit.ly/3MuoDSN
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

Hello and welcome to 80/20’s product highlight series. Today we are going to take a look at door glides. These door glides allow two profiles to slide together with ease, perfect for bi-fold doors. They are easy to install, available in both fractional and metric, and compatible across a wide range of profile series.

Now when it comes to using the door glide, machining will need to be done to one of your bars, with one end tap on one end. More information on 80/20’s machining services can be found in the 80/20 product catalog.

Now when it comes to installing it, you’ll take the door glide, and simply thread it into the end tap. From there you’ll get it down flush with the end of the profile. Take your mating profile, and slide it right in. From there, you have a functioning door glide with nice smooth movement.

Now hopefully you found this segment on door glides helpful. For more information, visit 8020.net, and make sure to subscribe to future 80/20 videos. And as always, make it a great day.

$80/20: Door Glide Overview To Purchase: https://bit.ly/3MuoDSN Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we are going to take a look at door glides. These door glides allow two profiles to slide together with ease, perfect for bi-fold doors. They are easy to install, available in both fractional and metric, and compatible across a wide range of profile series. Now when it comes to using the door glide, machining will need to be done to one of your bars, with one end tap on one end. More information on 80/20’s machining services can be found in the 80/20 product catalog. Now when it comes to installing it, you’ll take the door glide, and simply thread it into the end tap. From there you’ll get it down flush with the end of the profile. Take your mating profile, and slide it right in. From there, you have a functioning door glide with nice smooth movement. Now hopefully you found this segment on door glides helpful. For more information, visit 8020.net, and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20: Drill Jigs Overview

80/20 Ideabuilder®: Designing with Pipe and Joint

80/20: Milling Connector Overview

80/20: 1130mm Task Light with High Low Switch (21130)

80/20: 12 Robot Mounting Plate 40004-CP

$80/20: Stanchions Overview To Purchase: https://bit.ly/3BpAITY Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series today we’re going to take a look at stanchions. Stanchions are great for holding tubes, and round bars into place. They are unique to our fractional product line and great for applications such as camera mounts, sensors, and much more. Now our stanchions come in a variety of styles, we have single and double, offset and centered, horizontal and vertical, and our cross clamp. Regardless of your choice, a bolt assembly will be needed. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now when it comes to installing our stanchion, we’ll take our bolts and our washers, load them in there, and we’ll take our t-nut and put it on the end of our bolt. Now you want to make sure that the pilot projection on the Tnut is facing away from the stanchion. So we’ll take our stanchion, and simply slide it into the open Tslot. We’ll get into the desired location that we want, and we’ll tighten down our bolts. Now once we have that tightened down, we can put our tube in. We’ll take our wrench and we’ll tighten down the bolts on the side of the stanchion to hold our tube into place. Now one last stanchion we want to talk about is our cross clamp. Has a strong hold, but it’s adjustable. So any time you need to move a tube, simply loosen the brake, move it into a new location that you want, and tighten it back down. Now hopefully you found this segment on stanchions helpful, for more information please visit 8020.net and be sure to subscribe to future 80/20 videos, and as always make it a great day.$

80/20: 10 Series 10-32 Slide-in Economy T-Nut (3276)

80/20: Central Connectors

80/20: 10 Series Slide-In Economy T-Nut Centered Thread (3785)

80/20: Flat Head Socket Cap Screw (3401)

$80/20: Slam Latch Overview To Purchase: https://bit.ly/42nvMdv Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at the slam latch. This latch is both secure, and able to be locked. It’s easy to install and is available in both fractional and metric. Now the great thing about this latch, is that it requires no machining. However, a bolt assembly will be required to install it. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now when it comes to installing the slam latch, both sides of it are going to install in the same way, so we got the handle side already installed. To install the latch side, we’re going to take one last bolt and feed it through, put one last T-nut on. Once we got that preloaded on, we’re going to drop it right into the T-slot. Get that in there, we’ll line it up with the handle side, we’ll snap it all into place, we’ll go ahead and hold that into place and grab our wrench and tighten it down. Now once we got that tightened into place, we’ve got a secure connection, but we’re going to add on a little extra security,. We’re going to add in these cover caps. Now once these are slid in and the whole handle is locked into place, you’re not going to be able to access your bolts. That’s going to give you added security for when you have it locked up. Now hopefully you found this segment on the slam latch helpful. For more information please visit 80/20.net and be sure to subscribe to future 80/20 videos. And as always, make it a great day.$

8020 LLC (80/20) |

80/20: Door Glide Overview