80/20: Electric Lift System (2372) @8020llc

Uploaded December 2023 | Updated September 2026, 1 week ago

To Purchase: bit.ly/3O1EU2a
Find in Catalog: bit.ly/428g7iZ
80/20 Website: bit.ly/3peM7n3

With up to 1 foot in height adjustment, this electric lift system is a fantastic ergonomic solution. It mounts easily to the frame, and you can adjust the height with the touch of a button! As a bonus, you can even program 3 saved heights for different users!

• Includes 3 programmable height settings, and a digital readout of current height

• Max load: 600 kg (1320lbs) – includes weight of frame

• Max stroke: 300mm (11.811”)

• Lifting speed: 9mm per second (.354”/sec)

• Included in kit: control box (1), memory control switch (1), linear leg units with 6.5’ cables (4), 9.5’ power cable (1), rubber leveling feet (4), mounting brackets (8), M5 x 8mm bolts (16)

• Kit ships in one box weighing 33 lbs and measuring 30” x 10” x 7” in size

$80/20: Hidden Corner Connector Overview To Purchase: https://bit.ly/3BI9Bnu Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n Hello, and welcome to 80/20s product highlight series. Today we are going to take a look at the hidden corner connector. 80/20s hidden corner connector is not only simple to use, but is virtually invisible once set into place. It keeps those tight, secure connections, hidden from the naked eye. Its available in both fractional, and metric. Now the hidden corner connector comes in one piece, with two set screws already preassembled in the fastener. A great aspect of this connector is that no machining is required to your bars. Now when it comes to installing the connector, youre going to start with your connector and one bar. Slide it into the open T-slot, take your other bar and slide it over the connector. Were going to take our wrench from there, and tighten down the two screws. Now the great thing about the corner connector is its adjustability. Simply loosen the bolts, and slide it into a new location. Once secured, we have a clean hidden connection. Now hopefully you found this segment on the hidden corner connector helpful. For more information, please visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20: 15 Series Access Hole Drill Jig (6075)

$80/20: Wire Duct Overview To Purchase: https://bit.ly/44JxZBL Find in Catalog: https://bit.ly/428g7iZ 80/20 Website: https://bit.ly/3peM7n3 Hello and welcome to 80/20’s product highlight series. Today we’re going to take a look at wire duct. Wire duct is a great way to neatly organize your cables. It’s available in both fractional and metric, compatible across a wide range of profile series, and requires no machining. However, a bolt assembly will be required. More information on 80/20’s recommended bolt assemblies can be found in the 80/20 product catalog. Now to install it, we’ve already got our bolts in and two our T-nuts on. So we’re going to go ahead and preload our last Tnut onto our bolt. Get that on there. Just get our profile into position, and we’ll just slide our T-nuts into the T-slot. We’ll get it to the desired location that we want, we’ll grab our wrench, and we’ll tighten down our bolts. It’s also worth noting that these have slot tabs at the end of them, so if you need a longer length, you can link a couple of them together. Now hopefully you found this segment on wire duct helpful. For more information please visit 8020.net and make sure to subscribe to future 80/20 videos. And as always, make it a great day.$

80/20: Roller Track with Flanged Wheels (R40-RT96FL)