Uploaded August 2026 | Updated November 2026, 1 day ago
To celebrate hitting 50,000 subscribers, I’m taking on one of the most unique audio preservation projects I’ve ever worked on: a complete restoration of a 1948 Webster-Chicago Model 180 Wire Recorder!
Before magnetic tape took over the world, audio was recorded on microscopic strands of stainless steel wire spinning at high speeds. In this video, we break down the mechanical drive system, replace the dried-up rubber idler wheels and caps, recapped the tube amplifier, and get this piece of 1940s audio history playing again.
Thank you all so much for 50k! I couldn't have done it without your support. Grab a coffee, sit back, and let's bring this classic piece of vintage technology back to life.
CHAPTERS:
00:00 - Introduction
00:55 - Mechanical Disassembly and Inspection
05:21 - Cleaning and Lubrication
07:30 - Mechanical Reassembly
11:42 - Smoke Test
12:16 - Vacuum Tube Testing
12:52 - Electronic Disassembly
14:45 - Transformer Rebuild
17:15 - Component Testing and Replacement
18:25 - Electronic Re-assembly
21:04 - Second Smoke Test / Tube Installation
22:00 - Amplifier Test
23:12 - Final Re-assembly
24:55 - Operation / Conclusion
To celebrate hitting 50,000 subscribers, I’m taking on one of the most unique audio preservation projects I’ve ever worked on: a complete restoration of a 1948 Webster-Chicago Model 180 Wire Recorder!
Before magnetic tape took over the world, audio was recorded on microscopic strands of stainless steel wire spinning at high speeds. In this video, we break down the mechanical drive system, replace the dried-up rubber idler wheels and caps, recapped the tube amplifier, and get this piece of 1940s audio history playing again.
Thank you all so much for 50k! I couldn't have done it without your support. Grab a coffee, sit back, and let's bring this classic piece of vintage technology back to life.
CHAPTERS:
00:00 - Introduction
00:55 - Mechanical Disassembly and Inspection
05:21 - Cleaning and Lubrication
07:30 - Mechanical Reassembly
11:42 - Smoke Test
12:16 - Vacuum Tube Testing
12:52 - Electronic Disassembly
14:45 - Transformer Rebuild
17:15 - Component Testing and Replacement
18:25 - Electronic Re-assembly
21:04 - Second Smoke Test / Tube Installation
22:00 - Amplifier Test
23:12 - Final Re-assembly
24:55 - Operation / Conclusion



![I Built a Desktop AI Assistant with an ESP32! Part 2
In Part 2 of building my custom 3D-printed AI desktop assistant, we run the initial demo and go through options during which time an issues was found and analyzed causing a redesign of the unit which was then re-tested and demoed
TIMESTAMPS:
0:00 - Recap of Part one
1:06 - Demo of Initial Configuration and Options
4:03 - Basic Acoustic Diagnostics
6:45 - Design Failure and Acoustic Analysis
9:07 - The Re-Design
10:03 - Assembly
11:10 - Re-Redesign and Assembly
17:17 - Post Rebuild Testing
HARDWARE & COMPONENTS USED:
- ESP32 Development Board
- OLED / TFT Display Module
- I2S Microphone & Audio Amplifier / Speaker
- Custom 3D Printed Chassis
3D PRINT FILES (STLs):
https://makerworld.com/en/models/3324770-lilygo-t5-e-paper-esp32-case
ESP32 Software for the project: https://github.com/jordancrubin/ESP32-AI-Module
WATCH PART 1 (Firmware & Live AI Demo): https://www.youtube.com/watch?v=0tuumnskRkU
ESP32 N16R8
https://amzn.to/4enfSts
ICS43434 Microphone [2 for beamforming]
https://amzn.to/4enfSts
2Pack 8 Ohm 3W speakers
https://amzn.to/3PgiSNR
BME680 Envitonmental monitoring sensor
https://amzn.to/4teaRHc
MAX98357 Amplifier 3W
https://amzn.to/4teaRHc
USB C Power connectors
https://amzn.to/4teaRHc
Protoboard
https://amzn.to/496qjhk
Crimp connector kit
https://amzn.to/48zZiCK
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#ESP32 #3DPrinting #ArtificialIntelligence #DIYTech #Maker #EmbeddedSystems #DesktopSetup I Built a Desktop AI Assistant with an ESP32! Part 2](https://i.ytimg.com/vi/cnIluqcgAWM/mqdefault.jpg)
![Aerogarden Bounty Elite Vs. Amazons Cheapest Comparable Knockoff [UPDATE]
Folks have asked for an update on the Aerogarden Bounty Knockoff, and I happened to be up in New England with some more info on the unit after four months along with a moving adventure with a subsequent post move setup down south.
Bounty Elite: https://amzn.to/4019mxX
AFFLAT unit: https://amzn.to/3Jf8cbv
AeroGarden Heirloom Salad Greens Mix Seed Pod Kit - 6-Pod
https://amzn.to/3lAsCUm
AeroGarden Sweet Bell Peppers Seed Pod Kit (9-pod)
https://amzn.to/3lzI9nx
AeroGarden Liquid Nutrients (1 Liter)
https://amzn.to/3LOvEiI
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#aerogarden #hydroponics #diygarden Aerogarden Bounty Elite Vs. Amazons Cheapest Comparable Knockoff [UPDATE]](https://i.ytimg.com/vi/cpKWoYa6Mnw/mqdefault.jpg)





