You’re Probably Using the Wrong RPM When Drilling @ToolsToday
You’re Probably Using the Wrong RPM When Drilling  @ToolsToday
Uploaded October 2026 | Updated November 2026, 2 hours ago
You’re probably using the wrong RPM when drilling… especially when switching between materials.
Same 3/8” drill bit across six different materials.
Acrylic, aluminum, brass, hardwood, softwood, and steel.
The Jet Smart Drill Press sets the RPM based on the material, bit type and size, so you’re not guessing speeds, you’re just drilling. Check out the tools used on our website -

Jet 20" Smart Drill Press, item no. JT1-2060 - toolstoday.com/jet-jdp-20s-20-smart-drill-press.html

FEIN VersaMag Vise, item no. 90701004020 - toolstoday.com/fein-90701004020-versamag-vise-set.html
#short #shorts
You’re Probably Using the Wrong RPM When DrillingSmall Details That Make This Pencil Holder BetterRouting Grooves with Track for C ChannelStraight Inserts No Drill Press NeededSimple Fold Out Legs for a Cornhole BoardI Messed Up This CNC Baluster… Then Saved It  #woodworking #cncHow Accurate Is the Powermatic PM15BHH Planer?Stop Breathing DustCordless Kapex Making Quick Work of 2×4sAdding the Perfect Edge to These CNC Garden SignsWood Jewelry Box on CNCAdjustable Router Juice Groove Jig
ToolsToday |

You’re Probably Using the Wrong RPM When Drilling

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER