Uploaded June 2019 | Updated November 2026, 2 hours ago
You can build this.
You need all the parts, any old soldering iron, good solder, pliers, steady hands, good vision, the ability to follow along.... but if you have all those things, this is the project for you!
This version of the MS-20 is very controllable, very smooth, full-featured, and pretty easy to build. The resonance is not harsh (thanks to the diodes in the feedback path) but as drawn, there's no way to get 1V/octave response out of it. At the end of the video I explain how you can get a 1V/octave response if that's important to you*.
Here's a link to the schematic -- bit.ly/2LcN5tV
LM13700 chip -- bit.ly/2JUeVeD
TL074 chip -- bit.ly/2WFI4QK
Transistor 2N3906 -- bit.ly/2EOd1rI
Resistors!!! -- bit.ly/2ENPY05
Capacitors!!! -- bit.ly/2Xl33VX
Potentiometers -- bit.ly/2KAsxMd
Trimmers -- bit.ly/2J3B5Z4
RCA jacks like what I use -- bit.ly/2KklpCN
3.5mm mono jacks like what Eurorack uses -- bit.ly/2W5iyA4
*If 1V/octave tuning is important to you, this is what you need to do:
The 68K resistor going to the wiper of the "Adjustable CV" potentiometer (it's the only 68K resistor in the whole project) can be changed to a 47K resistor. That way, you can connect your keyboard or whatever 1V/octave voltage source you have, and tune is using the Adjustable CV potentiometer. It won't be perfect, and it won't stay in tune (not temperature compensated), but with that in mind, you will have a workable 1V/octave VCO.
You can build this.
You need all the parts, any old soldering iron, good solder, pliers, steady hands, good vision, the ability to follow along.... but if you have all those things, this is the project for you!
This version of the MS-20 is very controllable, very smooth, full-featured, and pretty easy to build. The resonance is not harsh (thanks to the diodes in the feedback path) but as drawn, there's no way to get 1V/octave response out of it. At the end of the video I explain how you can get a 1V/octave response if that's important to you*.
Here's a link to the schematic -- bit.ly/2LcN5tV
LM13700 chip -- bit.ly/2JUeVeD
TL074 chip -- bit.ly/2WFI4QK
Transistor 2N3906 -- bit.ly/2EOd1rI
Resistors!!! -- bit.ly/2ENPY05
Capacitors!!! -- bit.ly/2Xl33VX
Potentiometers -- bit.ly/2KAsxMd
Trimmers -- bit.ly/2J3B5Z4
RCA jacks like what I use -- bit.ly/2KklpCN
3.5mm mono jacks like what Eurorack uses -- bit.ly/2W5iyA4
*If 1V/octave tuning is important to you, this is what you need to do:
The 68K resistor going to the wiper of the "Adjustable CV" potentiometer (it's the only 68K resistor in the whole project) can be changed to a 47K resistor. That way, you can connect your keyboard or whatever 1V/octave voltage source you have, and tune is using the Adjustable CV potentiometer. It won't be perfect, and it won't stay in tune (not temperature compensated), but with that in mind, you will have a workable 1V/octave VCO.










