Uploaded July 2019 | Updated November 2026, 2 days ago
Download and print the circuit paper, get the electronic parts, plug in your soldering iron, and build this with me!
This 808 kick drum circuit is functionally identical to the original TR-808 kick with some cool mods. There's a pitch mod for higher and lower kicks. There's a decay mod that will let you get more-than-infinite decay times (it'll just oscillate forever). There's a wave clipper that'll add harmonics to the kick to make it "cut through" the rest of the sounds, which can be useful if you're using small speakers that can't do real bass. Finally, there's lots more *amplitude*.
I have simplified the circuit in a few ways, making it easier to build. You can build a perfect replica with everything exactly as it was from the factory, including obsolete transistors and 5%-precision carbon resistors if that's your thing, but I don't cover that here.
There's an error on the schematic and circuit paper that I use, so make sure you use the schematic and circuit paper linked below! The error is in where the clipper bit connects -- it will only affect the way the kick drum sounds with the clipper diode engaged. In my build you can hardly tell that it's turned on, if you do it according to the updated schematic, it'll be "sharper" sounding.
Here's the bill of materials -- tinyurl.com/y3uj6e98
Here's the "circuit page" -- drive.google.com/file/d/1eUOtXgzmMO8yndr-SS1ruVg1b2zQ_cWQ/view?usp=sharing
Here's the schematic -- drive.google.com/file/d/1hXDxhepe79-JgeJbB9JWoPXYUeV90bsF/view?usp=sharing
TL074 chip -- bit.ly/2WFI4QK
Resistor kit!!! -- bit.ly/2ENPY05
Resistors by the value (like for the 8.2K and 2.7K weirdos) -- tinyurl.com/y38ugbj2
Ceramic disk capacitors for all your chips!!! -- tinyurl.com/yxzf6e7t
Nice assortment of film capacitors -- tinyurl.com/y4k98quo
Potentiometers -- bit.ly/2KAsxMd
Download and print the circuit paper, get the electronic parts, plug in your soldering iron, and build this with me!
This 808 kick drum circuit is functionally identical to the original TR-808 kick with some cool mods. There's a pitch mod for higher and lower kicks. There's a decay mod that will let you get more-than-infinite decay times (it'll just oscillate forever). There's a wave clipper that'll add harmonics to the kick to make it "cut through" the rest of the sounds, which can be useful if you're using small speakers that can't do real bass. Finally, there's lots more *amplitude*.
I have simplified the circuit in a few ways, making it easier to build. You can build a perfect replica with everything exactly as it was from the factory, including obsolete transistors and 5%-precision carbon resistors if that's your thing, but I don't cover that here.
There's an error on the schematic and circuit paper that I use, so make sure you use the schematic and circuit paper linked below! The error is in where the clipper bit connects -- it will only affect the way the kick drum sounds with the clipper diode engaged. In my build you can hardly tell that it's turned on, if you do it according to the updated schematic, it'll be "sharper" sounding.
Here's the bill of materials -- tinyurl.com/y3uj6e98
Here's the "circuit page" -- drive.google.com/file/d/1eUOtXgzmMO8yndr-SS1ruVg1b2zQ_cWQ/view?usp=sharing
Here's the schematic -- drive.google.com/file/d/1hXDxhepe79-JgeJbB9JWoPXYUeV90bsF/view?usp=sharing
TL074 chip -- bit.ly/2WFI4QK
Resistor kit!!! -- bit.ly/2ENPY05
Resistors by the value (like for the 8.2K and 2.7K weirdos) -- tinyurl.com/y38ugbj2
Ceramic disk capacitors for all your chips!!! -- tinyurl.com/yxzf6e7t
Nice assortment of film capacitors -- tinyurl.com/y4k98quo
Potentiometers -- bit.ly/2KAsxMd









