Uploaded November 2020 | Updated November 2026, 3 days ago
This is a terrible idea that nobody should do. Here's a drawing of how to get it done: photos.app.goo.gl/rmqkxz1RMVMaGeGi8
BUT if you do choose to undertake this project, you'll have a perfectly adequate bipolar power supply that should be able to run plenty of DIY synth modules, depending on how powerful your power adapters are.
I got these power supplies out of a box of electronic junk in my basement.
Mine are switching power supplies. Unregulated power bricks might work but voltages will vary a lot with load. Plus, they might catch on fire if/when you short the outputs together accidentally.
So don't build this project, but if you DO, use switching power supplies.
Plenty of really bad quality power adapters are out there that might make audio projects connected to them have unwanted noise or interference. If you're a Very Serious Person building a DIY synth, better to spend money on a real purpose-built power supply. But if you're into DIY synths for the craziness and fun, hurl this project together and enjoy the fact that FINALLY you can build all insane circuits out there that require a bipolar power supply!
Wait, NO, do NOT build this, because you'll be in violation of who KNOWS how many regulations put in place by the Conformitè Europëenne, Underwriters Laboratory, or the Federal Communications Commission, or any number of local laws.
But if you DO, make sure you are careful and for goodness sake, test it outside.
P.S. LOL I just read on Wikipedia that of 27 tested power adapters bearing the CE logo, only eight could actually pass their testing. The ones that did were from "reputable brands" like, I assume, Sony or Bosch or StarLuckyCharge (maybe not that last one).
This is a terrible idea that nobody should do. Here's a drawing of how to get it done: photos.app.goo.gl/rmqkxz1RMVMaGeGi8
BUT if you do choose to undertake this project, you'll have a perfectly adequate bipolar power supply that should be able to run plenty of DIY synth modules, depending on how powerful your power adapters are.
I got these power supplies out of a box of electronic junk in my basement.
Mine are switching power supplies. Unregulated power bricks might work but voltages will vary a lot with load. Plus, they might catch on fire if/when you short the outputs together accidentally.
So don't build this project, but if you DO, use switching power supplies.
Plenty of really bad quality power adapters are out there that might make audio projects connected to them have unwanted noise or interference. If you're a Very Serious Person building a DIY synth, better to spend money on a real purpose-built power supply. But if you're into DIY synths for the craziness and fun, hurl this project together and enjoy the fact that FINALLY you can build all insane circuits out there that require a bipolar power supply!
Wait, NO, do NOT build this, because you'll be in violation of who KNOWS how many regulations put in place by the Conformitè Europëenne, Underwriters Laboratory, or the Federal Communications Commission, or any number of local laws.
But if you DO, make sure you are careful and for goodness sake, test it outside.
P.S. LOL I just read on Wikipedia that of 27 tested power adapters bearing the CE logo, only eight could actually pass their testing. The ones that did were from "reputable brands" like, I assume, Sony or Bosch or StarLuckyCharge (maybe not that last one).










