Uploaded September 2019 | Updated November 2026, 1 hour ago
For today's project, I've got a beautiful piece of Box Elder Burl. I didn't know exactly how spectacular it would be until I put a finish on it. The figure makes it look like there are white flames coming up the side. This bowl proved to be challenging to hollow out. I tried several different bowl gouges, both of which were freshly sharpened, but they just skated off the wood. Maybe it was my inexperience, but I wasn't getting anywhere so I decided to switch over to the carbides. I was able to use the square carbide to get the depth and then the round carbide cutter to blend the sides and bottom. The negative rake carbide was crucial in getting a clean finish on the resin. Don't tell the other bowls, but this just might be one of my favorite bowls so far!
I hope you enjoyed this video and please let me know if you have any project that you'd like to see me do.
Please leave a comment if there are any questions you have.
SUBSCRIBE: youtube.com/wolfridgewoodworking
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Materials used on the white flame bowl (affiliate):
TotalBoat High Performance Epoxy (2:1) w/ Slow Hardener: amzn.to/30c1ZJE
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Doctor's Woodshop High Build Friction Polish: bit.ly/2CM4rbP
Abranet Sanding Screen: bit.ly/2lD2yJ3
Tools used on the white flame bowl (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
3/8" Bowl Gouge: amzn.to/30Zla5o
5/8" Bowl Gouge: amzn.to/34HDXon
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
Easy Wood Tools Carbide Tools: amzn.to/2N0FTy5
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Music by Epidemic Sound (http://www.epidemicsound.com)
For today's project, I've got a beautiful piece of Box Elder Burl. I didn't know exactly how spectacular it would be until I put a finish on it. The figure makes it look like there are white flames coming up the side. This bowl proved to be challenging to hollow out. I tried several different bowl gouges, both of which were freshly sharpened, but they just skated off the wood. Maybe it was my inexperience, but I wasn't getting anywhere so I decided to switch over to the carbides. I was able to use the square carbide to get the depth and then the round carbide cutter to blend the sides and bottom. The negative rake carbide was crucial in getting a clean finish on the resin. Don't tell the other bowls, but this just might be one of my favorite bowls so far!
I hope you enjoyed this video and please let me know if you have any project that you'd like to see me do.
Please leave a comment if there are any questions you have.
SUBSCRIBE: youtube.com/wolfridgewoodworking
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Materials used on the white flame bowl (affiliate):
TotalBoat High Performance Epoxy (2:1) w/ Slow Hardener: amzn.to/30c1ZJE
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Doctor's Woodshop High Build Friction Polish: bit.ly/2CM4rbP
Abranet Sanding Screen: bit.ly/2lD2yJ3
Tools used on the white flame bowl (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
3/8" Bowl Gouge: amzn.to/30Zla5o
5/8" Bowl Gouge: amzn.to/34HDXon
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
Easy Wood Tools Carbide Tools: amzn.to/2N0FTy5
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Music by Epidemic Sound (http://www.epidemicsound.com)










