Uploaded December 2018 | Updated November 2026, 9 hours ago
I've been using a similar dust collection to this for a while. It worked great, but my lathe is on the other wall and I had to run a hose across the floor when I used the it. I got tired of stepping over and constantly tripping over the hose. I thought it was time to remedy the situation.
In today's video, I will show you how I setup a dust collection system using a Oneida Dust Deputy paired with a shop vac to create a budget friendly dust collection system.
This will make cleanup after your woodworking projects a lot easier!
Please leave a comment if there are any questions you have.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Things I Used in This Project:
Rigid 14 Gal 6.0HP Shop Vac
thd.co/2SNfo2L
Oneida Dust Deputy
amzn.to/2EfHoaX
Dust Right® Lathe Dust Collection System
bit.ly/2QPS86E
Rockler 2-1/2'' T-Connector
bit.ly/2RSUpvl
Rockler 2-1/2'' StableGate™ with Bracket
bit.ly/2G7B4VA
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
bit.ly/2PCi5Cg
2-1/2'' Stainless Steel Hose Clamps
bit.ly/2QJcPkM
Dust Collection Floor Sweep
bit.ly/2EgW6i8
4" To 2-1/2" Hose Reducer
bit.ly/2QLb06L
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj
I've been using a similar dust collection to this for a while. It worked great, but my lathe is on the other wall and I had to run a hose across the floor when I used the it. I got tired of stepping over and constantly tripping over the hose. I thought it was time to remedy the situation.
In today's video, I will show you how I setup a dust collection system using a Oneida Dust Deputy paired with a shop vac to create a budget friendly dust collection system.
This will make cleanup after your woodworking projects a lot easier!
Please leave a comment if there are any questions you have.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Things I Used in This Project:
Rigid 14 Gal 6.0HP Shop Vac
thd.co/2SNfo2L
Oneida Dust Deputy
amzn.to/2EfHoaX
Dust Right® Lathe Dust Collection System
bit.ly/2QPS86E
Rockler 2-1/2'' T-Connector
bit.ly/2RSUpvl
Rockler 2-1/2'' StableGate™ with Bracket
bit.ly/2G7B4VA
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
bit.ly/2PCi5Cg
2-1/2'' Stainless Steel Hose Clamps
bit.ly/2QJcPkM
Dust Collection Floor Sweep
bit.ly/2EgW6i8
4" To 2-1/2" Hose Reducer
bit.ly/2QLb06L
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj










