Woodturning: Almost Ambrosia Maple Bowl @WolfRidgeWoodworking
Woodturning: Almost Ambrosia Maple Bowl  @WolfRidgeWoodworking
Uploaded October 2019 | Updated November 2026, 18 hours ago
Today's project is a small ambrosia maple bowl that looks like it's smiling! Since the blank had a smile, it spoke to me that it wanted to be a happy little bowl. I decide to make a bowl/hollow form. I use hollow form is the loosest way. I wanted the bowl to have a big curve and the interior walls to follow the curve all the way to the bottom. This was my first time turning ambrosia maple. It is an easy wood to turn, but I did have some tear out on the end grain. The wasn't much character that makes ambrosia maple.....well ambrosia maple. This is why I'm calling it almost ambrosia maple.

I started by finding the center and drilling at 1/4" hole in the center. This allowed me to use my circle cutting jig on the band saw. After I had round, I needed drill a bigger hole (3/8") to fit the worm screw. Once mounted to the lathe, I trued up the blank using the 5/8" bowl gouge. To get the curve that I was looking for, I marked a line in the middle of the blank. I started forming the curve by shaping the bottom first. After I was happy with the bottom curve, I started on the top and met in the middle. There was a bit of tear out on the end grain. Even after sanding with 80 grit it was still pretty rough. This is where sanding sealer comes in handy. It stiffens the fibers and allows the sand paper to do its job. It was super smooth after the sanding sealer and Ack's Abrasive Paste. I made hollowing out the inside easier by using a 2 3/4" forstner bit. To finish off the hollowing, the Easy Wood Tools #1 Hollower did the trick. Before you knew it.....the bowl was finished!

I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!

Philippians 4:13 (NKJV)
I can do all things through Christ who strengthens me.

Go check out Peggy's (PF Woodturning) channel
youtube.com/user/peggy29100

Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order

Materials used on the acacia bowl (affiliate):
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Abranet Sanding Screen: bit.ly/2lD2yJ3

Tools used on the acacia bowl (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Wen 10" Band Saw: amzn.to/32hYleF
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools #1 Hollower: amzn.to/2oNFKaY
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
Oneway Live Center: amzn.to/2mbWKXH

SUBSCRIBE: youtube.com/wolfridgewoodworking

Please leave a comment if there are any questions you have.

You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com

Ed Parker
P.O Box 1893
Queen Creek, AZ 85142

Music by Epidemic Sound (http://www.epidemicsound.com)
Woodturning: Almost Ambrosia Maple BowlUnleashing Creativity: Elevating Resin Pen Blanks with Aluminum or 3D Printed HoneycombWoodturning: A mesquite bowl with cracks and bug holesWoodturning: Spalted Hackberry PlatterWoodturning: Boot Inspired Maple BowlWoodworking: Curly Maple & Lacewood Tea BoxCreality Falcon2: Painting Steel with a Laser Beam!Woodturning: Acacia  & Resin BowlWoodturning: Skull Pen kit with an acrylic blankWoodturning: A Walnut Four Legged Square BowlWoodturning: Polka Dot BowlWoodworking: Ash End Grain Cutting Board
Wolf Ridge Woodworking |

Woodturning: Almost Ambrosia Maple Bowl

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER