Uploaded November 2018 | Updated November 2026, 9 hours ago
Today's woodturning project is a spalted hackberry platter. This spalted hackberry is an amazing piece of wood. It was very challenging to turn due to the punkiness of the wood. I could not get a smooth finish after using different tools and putting a sharp edge on them, but I remembered seeing a video where the tool was turned 45 degrees and used as a shear scraper. That did the trick and I got a smooth finish.
Woodturning a platter is one of the best woodturning projects to get started woodturning with. It requires only limited tools to get started and you can easily turn a piece of dimensional lumber from a big box store into a platter.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Please leave a comment if there are any questions you have or if you feel like a missed explaining a step.
Tools that I used in this project
Jet 1221VS Lathe:
amzn.to/2OdLhCB
Easy Wood Tools Carbide Tools:
amzn.to/2N0FTy5
Nova 48202 G3 Wood Turning Chuck
amzn.to/2yGRoGC
Nova 6006 8" Cole Jaw Set
amzn.to/2DpdQaG
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj
Today's woodturning project is a spalted hackberry platter. This spalted hackberry is an amazing piece of wood. It was very challenging to turn due to the punkiness of the wood. I could not get a smooth finish after using different tools and putting a sharp edge on them, but I remembered seeing a video where the tool was turned 45 degrees and used as a shear scraper. That did the trick and I got a smooth finish.
Woodturning a platter is one of the best woodturning projects to get started woodturning with. It requires only limited tools to get started and you can easily turn a piece of dimensional lumber from a big box store into a platter.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Please leave a comment if there are any questions you have or if you feel like a missed explaining a step.
Tools that I used in this project
Jet 1221VS Lathe:
amzn.to/2OdLhCB
Easy Wood Tools Carbide Tools:
amzn.to/2N0FTy5
Nova 48202 G3 Wood Turning Chuck
amzn.to/2yGRoGC
Nova 6006 8" Cole Jaw Set
amzn.to/2DpdQaG
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj










