Woodturning: Skull Pen kit with an acrylic blank @WolfRidgeWoodworking
Woodturning: Skull Pen kit with an acrylic blank  @WolfRidgeWoodworking
Uploaded October 2018 | Updated November 2026, 5 days ago
Today's video will show you how to turn a pen on a lathe. Pen making is easy and a lot of fun! You can also find other woodworking and woodturning projects on my channel.

My website:
wolfridgewoodworking.com

Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA

Today's woodturning project is a Penn State Skull Antique Pewter Twist Pen Kit (#PKSKULLAP) with a Lava Bright Classic 2 Pure White with Black Thread pen blank. This is a great project for anyone who is new to woodturning.

Pen making is one of the easiest projects to start with when you are beginning woodturning. All you need to get started woodturning a pen is a lathe, woodturning tools, a pen kit, a pen blank, sandpaper, some sort of finish, and a willingness to learn!

The basic steps to turning a pen is:

1. Cut the pen blank to fit the brass tubes.
2. Drill the proper sized hole to fit the brass tubes.
3. Make the ends of the blank flat and square.
4. Turn the pen blank down to the correct bushings.
5. If a wood blank was used, sand to 400 grit or if acrylic, skip to step 6.
6. Apply a finish like CA glue.
7. Sand using micro mesh pads from 1500 to 12,000 grit.
8. Apply one or more coats of a plastic polish.

Please leave a comment if there are any questions you have or if you feel like a missed explaining a step.

Tools that I used in this project
Jet 1221VS Lathe:
amzn.to/2OdLhCB

Easy Wood Tools Carbide Tools:
amzn.to/2N0FTy5

Pen Kit:
bit.ly/2pJaDKI

Pen Blank:
bit.ly/2OSbwzb

Medium CA Glue:
amzn.to/2DH72XJ

Sandpaper:
bit.ly/2xPbFcN

Micromesh:
amzn.to/2DHFIIC

Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5

Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj

#woodturning
Woodturning: Skull Pen kit with an acrylic blankWoodturning: A Walnut Four Legged Square BowlWoodturning: Polka Dot BowlWoodworking: Ash End Grain Cutting BoardWoodturning: The Flying Padauk Rice BowlWoodturning: Maple Burl.....bowl or funnel?Woodturning: Burl Cutoff Hybrid BlankWoodturning: From Scrap Cutoff to Curly Maple PlatterWoodturning: Ogeeish Cherry BowlWoodturning: A Shallow Bubinga BowlWoodturning: White Flame BowlShop Project: Dust Collection on a budget
Wolf Ridge Woodworking |

Woodturning: Skull Pen kit with an acrylic blank

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER