Woodturning: Boot Inspired Maple Bowl @WolfRidgeWoodworking
Woodturning: Boot Inspired Maple Bowl  @WolfRidgeWoodworking
Uploaded November 2019 | Updated November 2026, 15 hours ago
Today's project shows how you can dress up a piece of wood that might not have quite the figure as some other species of wood.

While I was traveling recently, I looked down at my boot and noticed the pattern around the stitchings. I liked the way it looked and this piece of maple immediately came to mind. I was trying to figure out how to mark the locations of the holes on a curved surface. I could use string, but it would stretch and not provide consistent spacing. Then I saw my edge banding material for plywood. It was perfect! I was able to mark the exact locations to drill the holes. When I made the Garlic Keeper and drilled the holes, I got a lot of tear out inside the container. I wanted to avoid that this time so I decided to drill the holes before I hollowed the inside. That worked like a charm. When I was drilling the holes, I noticed that the drill bit was getting really hot. I found another set of bits and changed it every few holes to keep the bits cooler and prevent them from getting dull.

One challenge when you either have a light and dark colored wood or you have light colored wood and a dark paint, you can stain the wood when you sand. To prevent that from happening, coat the surface with sanding sealer. I used this trick and there was no staining in the maple.

When I hollowed out the inside of the bowl, I did get a little bit of wood fiber sticking out of the holes. At first I tried to use a round wood file, but it was too coarse. Then I remembered that I recently purchased chainsaw files. These were perfect as they were more fine. I was able to clean up the wood fibers. It did file away the dark paint, but I was able to fix that with a Sharpie.

I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!

Proverbs 3:5-6 (NIV)
Trust in the LORD with all your heart and lean not on your own understanding; in all your ways submit to him, and he will make your paths straight.

Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order

Materials used (affiliate):
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Doctor's Woodshop High Build Friction Polish: bit.ly/2CM4rbP
Abranet Sanding Screen: bit.ly/2lD2yJ3

Tools used (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools #1 Hollower: amzn.to/2oNFKaY
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
1" Round Scraper: amzn.to/2L4xSLi
Angle Drill + Sanding Bundle: bit.ly/2ZwfmQU

SUBSCRIBE: youtube.com/wolfridgewoodworking

Please leave a comment if there are any questions you have.

You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com

Ed Parker
P.O Box 1893
Queen Creek, AZ 85142

Music by Epidemic Sound (http://www.epidemicsound.com)
Woodturning: Boot Inspired Maple BowlWoodworking: Curly Maple & Lacewood Tea BoxCreality Falcon2: Painting Steel with a Laser Beam!Woodturning: Acacia  & Resin BowlWoodturning: Skull Pen kit with an acrylic blankWoodturning: A Walnut Four Legged Square BowlWoodturning: Polka Dot BowlWoodworking: Ash End Grain Cutting BoardWoodturning: The Flying Padauk Rice BowlWoodturning: Maple Burl.....bowl or funnel?Woodturning: Burl Cutoff Hybrid BlankWoodturning: From Scrap Cutoff to Curly Maple Platter
Wolf Ridge Woodworking |

Woodturning: Boot Inspired Maple Bowl

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER