Uploaded June 2018 | Updated September 2026, 2 weeks ago
WINNERS WERE DRAWN ON 17/7/2018:
----------------------------------------------------------------
Prize #1 winner: Apdtwo7
Prize #2 winner: noam amir
Prize #3 winner: Andres Jaramillo
You can find the footage from the youtube comment picker here: youtu.be/hh_Wk5_j_Ew
CONGRATULATIONS! Make sure you contact me to arrange for your prizes :D
Thanks to EVERYONE for participating, stay tuned for MORE!
----------------------------------------------------------------
----------------------------------------------------------------
I haven't done a giveaway for a while, shame on me! A huge THANK YOU to each and every one of you 5555 awesome people for supporting my channel!
If you are not one of them but you enjoy my content, subscribe and hit the bell icon to get notified when a new video is released :)
Let's cut to the chase:
3 prizes, up to 3 winners (everyone remains in the pool for the draw of each prize).
In order to participate, you will have to check the product pages of the 1st prizes (BNF quad and Gimbal Sticks), leave a comment with anything you want to say and definitely include the following:
- Size and KV of the motors used in the BNF quad.
- Product code of the Gimbal Sticks you want to win (the rest of the Tx accessories can match these sticks or you can mix & match the colors if you win).
You can find an example in the video.
Comments will be hidden until the winners have been drawn, in order to prevent spoilers, so PLEASE leave ONLY ONE COMMENT.
You can visit the product pages by using the links below, or by searching for the products online:
PRIZE #1
A ducted micro BNF quad, FlySky or FrSky version, including 3 batteries and charger:
goo.gl/3Pd57m (Banggood)
(the BNF quad is kindly provided by Banggood)
AND
A set of Tx accessories:
1x pair of gimbal sticks: goo.gl/U7JHNp (Hawk Creation)
8x pieces flat-bottom switch nuts: goo.gl/AgT8E3 (Hawk Creation)
1x pair of short switch caps (knobs): goo.gl/fv5z1d (Hawk Creation)
1x pair of long switch caps (knobs): goo.gl/JYBufh (Hawk Creation)
You can also find their product range in their Ebay shop: goo.gl/bfDrik (Ebay)
(the Tx accessory set is kindly provided by Hawk-Creation)
PRIZE #2
My favorite soldering iron:
goo.gl/HgShPY (Banggood)
(the soldering iron and the shipping/tracking are paid by me)
PRIZE #3
Best performing budget VRx module & Firmware:
goo.gl/7z98QN (Banggood)
goo.gl/z8yoHn (AchilleΣ)
(the module and the shipping/tracking are paid by me - the firmware is kindly provided by GC9N, the developer of AchilleS)
Clicking on the links above not only helps the channel (some are affiliate links) but also helps me get even bigger prizes for you in the future - Thanks in advance!
Only comments with the correct "answers" will participate in the giveaway draws.
The winner will have to provide privately a name and address, which will be used to send the prizes to him/her.
OFFICIAL RULES:
1. Entries that do not comply with YouTube's community guidelines (youtube.com/yt/policyandsafety/communityguidelines.html) will be invalid.
2. The 1st prizes will be provided by Banggood.com and by Hawk-Creation.com. The 2nd and 3rd prizes will be purchased by me on Banggood.com and sent to the winners' address.
3. YouTube is not a sponsor of this contest. By participating, you must release YouTube from any and all liability related to this contest.
4. Any personal information that is collected for this contest will be used for the sole purpose of selecting the winner and delivering the prizes.
5. Winners will be drawn in the middle of July 2018, depending on my schedule. This process will be done privately and the winners will be announced in a new video. I reserve the right to show or not show a recording or screengrabs of the process.
6. The winners will be selected randomly, using a Youtube comment picker, a random number generator or similar process.
7. In order to be eligible to enter this competition and have the chance to win the prizes you will have to leave a comment on this giveaway video, as described above and in the video.
8. The prizes must be able to be shipped to the winner's location. If restricted goods such as LiPo batteries cannot be shipped to the winner's location, the prize will probably have to change.
9. Shipping and tracking number (registered shipping) will be included with the prizes (paid by me and by the vendors)
GOOD LUCK!!!
-------------------------------
Song "Be Happy" by Dj Quads
Song link: soundcloud.com/aka-dj-quads/be-happy-vlog-music
Artist link: soundcloud.com/aka-dj-quads
CC-by license: creativecommons.org/licenses/by/3.0
-------------------------------
WINNERS WERE DRAWN ON 17/7/2018:
----------------------------------------------------------------
Prize #1 winner: Apdtwo7
Prize #2 winner: noam amir
Prize #3 winner: Andres Jaramillo
You can find the footage from the youtube comment picker here: youtu.be/hh_Wk5_j_Ew
CONGRATULATIONS! Make sure you contact me to arrange for your prizes :D
Thanks to EVERYONE for participating, stay tuned for MORE!
----------------------------------------------------------------
----------------------------------------------------------------
I haven't done a giveaway for a while, shame on me! A huge THANK YOU to each and every one of you 5555 awesome people for supporting my channel!
If you are not one of them but you enjoy my content, subscribe and hit the bell icon to get notified when a new video is released :)
Let's cut to the chase:
3 prizes, up to 3 winners (everyone remains in the pool for the draw of each prize).
In order to participate, you will have to check the product pages of the 1st prizes (BNF quad and Gimbal Sticks), leave a comment with anything you want to say and definitely include the following:
- Size and KV of the motors used in the BNF quad.
- Product code of the Gimbal Sticks you want to win (the rest of the Tx accessories can match these sticks or you can mix & match the colors if you win).
You can find an example in the video.
Comments will be hidden until the winners have been drawn, in order to prevent spoilers, so PLEASE leave ONLY ONE COMMENT.
You can visit the product pages by using the links below, or by searching for the products online:
PRIZE #1
A ducted micro BNF quad, FlySky or FrSky version, including 3 batteries and charger:
goo.gl/3Pd57m (Banggood)
(the BNF quad is kindly provided by Banggood)
AND
A set of Tx accessories:
1x pair of gimbal sticks: goo.gl/U7JHNp (Hawk Creation)
8x pieces flat-bottom switch nuts: goo.gl/AgT8E3 (Hawk Creation)
1x pair of short switch caps (knobs): goo.gl/fv5z1d (Hawk Creation)
1x pair of long switch caps (knobs): goo.gl/JYBufh (Hawk Creation)
You can also find their product range in their Ebay shop: goo.gl/bfDrik (Ebay)
(the Tx accessory set is kindly provided by Hawk-Creation)
PRIZE #2
My favorite soldering iron:
goo.gl/HgShPY (Banggood)
(the soldering iron and the shipping/tracking are paid by me)
PRIZE #3
Best performing budget VRx module & Firmware:
goo.gl/7z98QN (Banggood)
goo.gl/z8yoHn (AchilleΣ)
(the module and the shipping/tracking are paid by me - the firmware is kindly provided by GC9N, the developer of AchilleS)
Clicking on the links above not only helps the channel (some are affiliate links) but also helps me get even bigger prizes for you in the future - Thanks in advance!
Only comments with the correct "answers" will participate in the giveaway draws.
The winner will have to provide privately a name and address, which will be used to send the prizes to him/her.
OFFICIAL RULES:
1. Entries that do not comply with YouTube's community guidelines (youtube.com/yt/policyandsafety/communityguidelines.html) will be invalid.
2. The 1st prizes will be provided by Banggood.com and by Hawk-Creation.com. The 2nd and 3rd prizes will be purchased by me on Banggood.com and sent to the winners' address.
3. YouTube is not a sponsor of this contest. By participating, you must release YouTube from any and all liability related to this contest.
4. Any personal information that is collected for this contest will be used for the sole purpose of selecting the winner and delivering the prizes.
5. Winners will be drawn in the middle of July 2018, depending on my schedule. This process will be done privately and the winners will be announced in a new video. I reserve the right to show or not show a recording or screengrabs of the process.
6. The winners will be selected randomly, using a Youtube comment picker, a random number generator or similar process.
7. In order to be eligible to enter this competition and have the chance to win the prizes you will have to leave a comment on this giveaway video, as described above and in the video.
8. The prizes must be able to be shipped to the winner's location. If restricted goods such as LiPo batteries cannot be shipped to the winner's location, the prize will probably have to change.
9. Shipping and tracking number (registered shipping) will be included with the prizes (paid by me and by the vendors)
GOOD LUCK!!!
-------------------------------
Song "Be Happy" by Dj Quads
Song link: soundcloud.com/aka-dj-quads/be-happy-vlog-music
Artist link: soundcloud.com/aka-dj-quads
CC-by license: creativecommons.org/licenses/by/3.0
-------------------------------


![How to make a logo for your RapidFIRE (your own custom splash screen) - QUICK GUIDE
Making your own splashscreen (logo) for the RapidFIRE module is very easy.
It can be done with basic drawing programs like MSPaint, or even with online programs that run on your browser, like Lunapic.
The image should be in bitmap format (.bmp file), dimensions 128 x 64 pixels and preferably monochrome, for sharper results.
Choose less complex designs for a cleaner look and avoid cramped details that will look smudged on the screen of the module.
Also take a look at my ImmersionRC RapidFIRE module overview: https://youtu.be/RBBRhphPZTY
as well as at my Goggle Module shootouts and comparisons:
https://youtu.be/JVLv261fxZM
https://youtu.be/TtaBx8ZETg0
https://youtu.be/MqAJ3QVqZ4I
You can find the whole playlist here: https://www.youtube.com/playlist?list=PLT1bw0pJRpO1N-kkJAn6ouV1BH4YfzQRF
This is QUICK GUIDE: How to make a RapidFIRE Splash Screen (make your own custom logo) - Lets go!
👍 If you like my content and want to support the channel, you can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
👍 You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
👍 Subscribe for more unique content, here: https://goo.gl/6HNc7H
Thank you in advance!
👉 RapidFIRE goggle module:
https://goo.gl/3pHtKb (Banggood)
https://goo.gl/udKmCi (HobbyKing)
https://goo.gl/1hJzSp (Ebay)
https://goo.gl/WgbLPB (GetFPV)
https://goo.gl/7esnv7 (PiroFlipRC)
https://goo.gl/bpSedb (QuadCopters)
https://goo.gl/FVxF7e (FliteTest)
https://goo.gl/iMxm7j (MRP)
You can find the designs shown in this video - and most importantly share your own designs! - in this RCGroups thread: https://goo.gl/Rysk44
or post them on ImmersionRCs group on Facebook: https://goo.gl/xMSCfu
HOW TO SUPPORT THE [MuteFPV] CHANNEL:
You can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products): https://goo.gl/R4TceG
AMAZON (paid link): http://mutefpv.com/amazon
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products): https://goo.gl/wwTJwt
EBAY (the shortlink has to be bookmarked): https://goo.gl/gFRdy5
FPVMODEL (newest products): https://goo.gl/zmPxbf
HORUSRC (main page): https://goo.gl/n2fJDq
A huge THANK YOU in advance for your support!
This video features the song Victory (epic motivating orchestral rap instrumental) by Pr0Beats, available under a Creative Commons License
Song link: https://soundcloud.com/pr0beats/victory-epic-inspiring-orchestral-rap-instrumental-free-download
Artist link: https://soundcloud.com/pr0beats
CC-by license: https://creativecommons.org/licenses/by/3.0/
#muteFPV
#RapidFIRE
#IRCRapidFIRE How to make a logo for your RapidFIRE (your own custom splash screen) - QUICK GUIDE](https://i.ytimg.com/vi/aGE4QuxirvY/mqdefault.jpg)
![How to braid motor wires and which is better: Wire mesh sleeve or Braiding the wires? - QUICK GUIDE
If you find this silly or have sister(s) / daughter(s), just know that I had to google how to braid :P
Braiding the motor wires is fairly straight forward and it looks great in a build. You end up using more wire though - when multiplied by 4x motors, it adds up to weight that you could probably avoid, if you were planning to build as light as possible.
This is QUICK GUIDE: How to braid motor wires and which is better: Wire mesh or Braiding the wires? - Lets go!
👍 If you like my content and want to support the channel, you can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
👍 👍 You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
👍 👍 👍 Subscribe for more unique content, here: https://goo.gl/6HNc7H
Thank you in advance!
👉 Adhesive 3:1 heatshrink:
https://goo.gl/cx9DGb (Banggood)
https://goo.gl/GcZfTg (Ebay)
https://goo.gl/3qTFuP (AliExpress)
👉 Universal accessory kit for heat guns:
https://goo.gl/TCEYD5 (Banggood)
https://goo.gl/ZBsNLo (Ebay)
https://goo.gl/7mfSVT (AliExpress)
👉 Cable/Wire mesh:
https://goo.gl/MbyzEd (HobbyKing)
https://goo.gl/qsVLMt (Ebay)
👉 EMAX RSII 2206:
https://goo.gl/NFnmHM (Emax)
https://goo.gl/3sJ6bM (Banggood)
https://goo.gl/pFyiCV (Gearbest)
https://goo.gl/PYUEJm (Ebay)
👉 T-Motor F60:
https://goo.gl/2M5hJN (T-Motor)
https://goo.gl/VADHNi (Banggood)
https://goo.gl/1WH5h3 (Gearbest)
https://goo.gl/3zCneu (Ebay)
👉 T-Motor F40:
https://goo.gl/Kv6uYN (T-Motor)
https://goo.gl/5kgUbu (Banggood)
https://goo.gl/LHmx7A (Gearbest)
https://goo.gl/5bCy1Z (Ebay)
👍 👍 👍 HOW TO SUPPORT THE [MuteFPV] CHANNEL:
You can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products): https://goo.gl/R4TceG
AMAZON (paid link): http://mutefpv.com/amazon
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products): https://goo.gl/wwTJwt
EBAY (the shortlink has to be bookmarked): https://goo.gl/gFRdy5
FPVMODEL (newest products): https://goo.gl/zmPxbf
HORUSRC (main page): https://goo.gl/n2fJDq
A huge THANK YOU in advance for your support!
This video features the song Whistle (Instrumental) by Flo Rida
Not sure who to credit exactly, cant find much information on this track. I do not own this music and am sorry if you are shown ads because of it - I do not monetize my content.
#muteFPV How to braid motor wires and which is better: Wire mesh sleeve or Braiding the wires? - QUICK GUIDE](https://i.ytimg.com/vi/afdjXByA1WA/mqdefault.jpg)






