Uploaded August 2018 | Updated September 2026, 2 weeks ago
If you find this silly or have sister(s) / daughter(s), just know that I had to google how to braid :P
Braiding the motor wires is fairly straight forward and it looks great in a build. You end up using more wire though - when multiplied by 4x motors, it adds up to weight that you could probably avoid, if you were planning to build as light as possible.
This is QUICK GUIDE: How to braid motor wires and which is better: Wire mesh or Braiding the wires? - Let's go!
____________________
π If you like my content and want to support the channel, you can tip my 'piggy bank' via PAYPAL, here: goo.gl/gqrYuh
------------------------------
π π You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
π π π Subscribe for more unique content, here: goo.gl/6HNc7H
Thank you in advance!
π Adhesive 3:1 heatshrink:
goo.gl/cx9DGb (Banggood)
goo.gl/GcZfTg (Ebay)
goo.gl/3qTFuP (AliExpress)
π Universal accessory kit for heat guns:
goo.gl/TCEYD5 (Banggood)
goo.gl/ZBsNLo (Ebay)
goo.gl/7mfSVT (AliExpress)
π Cable/Wire mesh:
goo.gl/MbyzEd (HobbyKing)
goo.gl/qsVLMt (Ebay)
π EMAX RSII 2206:
goo.gl/NFnmHM (Emax)
goo.gl/3sJ6bM (Banggood)
goo.gl/pFyiCV (Gearbest)
goo.gl/PYUEJm (Ebay)
π T-Motor F60:
goo.gl/2M5hJN (T-Motor)
goo.gl/VADHNi (Banggood)
goo.gl/1WH5h3 (Gearbest)
goo.gl/3zCneu (Ebay)
π T-Motor F40:
goo.gl/Kv6uYN (T-Motor)
goo.gl/5kgUbu (Banggood)
goo.gl/LHmx7A (Gearbest)
goo.gl/5bCy1Z (Ebay)
====================
π π π HOW TO SUPPORT THE [MuteFPV] CHANNEL:
----------------------------
You can tip my 'piggy bank' via PAYPAL, here: goo.gl/gqrYuh
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products): goo.gl/R4TceG
AMAZON (paid link): mutefpv.com/amazon
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products): goo.gl/wwTJwt
EBAY (the shortlink has to be bookmarked): goo.gl/gFRdy5
FPVMODEL (newest products): goo.gl/zmPxbf
HORUSRC (main page): goo.gl/n2fJDq
A huge THANK YOU in advance for your support!
====================
-------------------------------
This video features the song "Whistle (Instrumental)" by Flo Rida
Not sure who to credit exactly, can't find much information on this track. I do not own this music and am sorry if you are shown ads because of it - I do not monetize my content.
-------------------------------
#muteFPV
If you find this silly or have sister(s) / daughter(s), just know that I had to google how to braid :P
Braiding the motor wires is fairly straight forward and it looks great in a build. You end up using more wire though - when multiplied by 4x motors, it adds up to weight that you could probably avoid, if you were planning to build as light as possible.
This is QUICK GUIDE: How to braid motor wires and which is better: Wire mesh or Braiding the wires? - Let's go!
____________________
π If you like my content and want to support the channel, you can tip my 'piggy bank' via PAYPAL, here: goo.gl/gqrYuh
------------------------------
π π You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
π π π Subscribe for more unique content, here: goo.gl/6HNc7H
Thank you in advance!
π Adhesive 3:1 heatshrink:
goo.gl/cx9DGb (Banggood)
goo.gl/GcZfTg (Ebay)
goo.gl/3qTFuP (AliExpress)
π Universal accessory kit for heat guns:
goo.gl/TCEYD5 (Banggood)
goo.gl/ZBsNLo (Ebay)
goo.gl/7mfSVT (AliExpress)
π Cable/Wire mesh:
goo.gl/MbyzEd (HobbyKing)
goo.gl/qsVLMt (Ebay)
π EMAX RSII 2206:
goo.gl/NFnmHM (Emax)
goo.gl/3sJ6bM (Banggood)
goo.gl/pFyiCV (Gearbest)
goo.gl/PYUEJm (Ebay)
π T-Motor F60:
goo.gl/2M5hJN (T-Motor)
goo.gl/VADHNi (Banggood)
goo.gl/1WH5h3 (Gearbest)
goo.gl/3zCneu (Ebay)
π T-Motor F40:
goo.gl/Kv6uYN (T-Motor)
goo.gl/5kgUbu (Banggood)
goo.gl/LHmx7A (Gearbest)
goo.gl/5bCy1Z (Ebay)
====================
π π π HOW TO SUPPORT THE [MuteFPV] CHANNEL:
----------------------------
You can tip my 'piggy bank' via PAYPAL, here: goo.gl/gqrYuh
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products): goo.gl/R4TceG
AMAZON (paid link): mutefpv.com/amazon
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products): goo.gl/wwTJwt
EBAY (the shortlink has to be bookmarked): goo.gl/gFRdy5
FPVMODEL (newest products): goo.gl/zmPxbf
HORUSRC (main page): goo.gl/n2fJDq
A huge THANK YOU in advance for your support!
====================
-------------------------------
This video features the song "Whistle (Instrumental)" by Flo Rida
Not sure who to credit exactly, can't find much information on this track. I do not own this music and am sorry if you are shown ads because of it - I do not monetize my content.
-------------------------------
#muteFPV







![Taranis mods #5: Backlight mod (SMD LED replacement) and custom display bezel - QUICK GUIDE
Finally I got around to doing the backlight mod on my FrSky Taranis X9D PLUS transmitter. I have wanted to convert the stock blue / cold white color of my stock display to a shade of orange for so long! And also replace my scratched screen cover while I am at it...
As a mod it is pretty much straight-forward: access the stock SMD LEDs and replace them with the color combination of your choice. In the backlight settings of the X9D you can adjust the intensity of each of the two LED colors and achieve the color you need.
Performing the mod is where it becomes tricky. Putting my carelessness aside, which was the reason why I damaged the ribbon cable of my display, the panel of the backlight was so well stuck to the PCB boards of the LEDs that I had to break the two short edges, in order for it to be detached. I hope yours has not adhered so firmly... Thanks to Minichado for helping out - also thanks to KokoblokoFPV for his spare LCD display :)
If you find SMD soldering intimidating, just make sure you use a fine clean tip, thin solder and tweezers. There is plenty of room around the LEDs so take your time and solder them one by one, flush to the board. If you have never soldered SMD before, make sure you practice before performing this mod.
This is QUICK GUIDE: Taranis mods #5 - Backlight mod (SMD LED replacement) and custom display bezel - Lets go!
*If you like my content and want to support the channel, you can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
* You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
* Subscribe for more unique content, here: https://goo.gl/6HNc7H
Thank you in advance!
Soldering iron
https://goo.gl/Ubxty1 (Banggood)
https://goo.gl/Af79wF (Gearbest)
https://goo.gl/xspMKz (Ebay)
https://goo.gl/LmqohP (FPVmodel)
Fine soldering tip
https://goo.gl/Wa5JR8 (Banggood)
https://goo.gl/RSTpnz (Ebay)
https://goo.gl/QQ3ZNJ (Gearbest)
Thin solder (I used 0.25mm from Cynel)
https://goo.gl/wTwHLe (Ebay)
Flux pen
https://goo.gl/3JqNhD (Banggood)
https://goo.gl/zsY5F7 (Ebay)
Solder wick
https://goo.gl/CbskQQ (Banggood)
https://goo.gl/oBErZi (Ebay)
ESD Tweezers
https://goo.gl/vSkKXa (Banggood)
https://goo.gl/ZYc1Ed (Ebay)
SMD LEDs (I used 0805 size)
https://goo.gl/3Lp3kB (Banggood)
https://goo.gl/TKPm1f (Ebay)
SMD LEDs (0603 size)
https://goo.gl/FjYcr2 (Banggood)
https://goo.gl/B7hqTr (Ebay)
Custom made display bezel (inlay) by BludzFPV
https://goo.gl/8xioYQ (BludzFPV)
Replacement LCD with backlight
https://goo.gl/8kVD4A (AliExpress)
Taranis X9D Plus SE
https://goo.gl/3XYJza (Banggood)
https://goo.gl/HovjNa (HorusRC)
Taranis X9D Plus
https://goo.gl/q6wY7D (Banggood)
https://goo.gl/2wAHQc (HorusRC)
https://goo.gl/6D61q6 (HobbyKing)
You can also take a look at my other Taranis mods videos, to get more ideas or find more info on the accessories and hydrodip case I have used:
Cheap and Easy mods and accessories:
https://www.youtube.com/watch?v=qBXBluXSC8w
Hydrodipped shell swap:
https://www.youtube.com/watch?v=bWAbMRTuMYw
M9 gimbal installation:
https://www.youtube.com/watch?v=J4IGZPNpn7s
Taranis SE mods:
https://www.youtube.com/watch?v=aoCfZb3bBso
You can find the relevant playlist here:
https://www.youtube.com/playlist?list=PLT1bw0pJRpO0jCI6L_p_5_ON4arVoZJt8
HOW TO SUPPORT THE [MuteFPV] CHANNEL:
You can tip my piggy bank via PAYPAL, here: https://goo.gl/gqrYuh
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products): https://goo.gl/R4TceG
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products): https://goo.gl/wwTJwt
EBAY (the shortlink has to be bookmarked): https://goo.gl/gFRdy5
FPVMODEL (newest products): https://goo.gl/zmPxbf
HORUSRC (main page): https://goo.gl/n2fJDq
A huge THANK YOU in advance for your support!
This video features the song Come on Take me Over by SK beats, available under a Creative Commons License
Song link: https://soundcloud.com/skbeatsproducer/instrumental-come-on-take-me
Artist link: https://soundcloud.com/skbeatsproducer
CC-by license: https://creativecommons.org/licenses/by/3.0/
#TaranisMods
#muteFPV
#FrSky
#FrSkyTaranis Taranis mods #5: Backlight mod (SMD LED replacement) and custom display bezel - QUICK GUIDE](https://i.ytimg.com/vi/cyaaNz1Weic/mqdefault.jpg)


