Uploaded October 2026 | Updated November 2026, 3 days ago
What a $5,000 PLC trainer actually contains: a processor, power supply, input switches, output indicators, pushbuttons, pilot lights, pots and terminal blocks.
โก QUICK ANSWER
A typical PLC training panel contains a processor, a power supply, digital input switches, output indicators, pushbuttons, pilot lights, sometimes a small motor, analog potentiometers, and terminal blocks for wiring. You plug it in, open the programming software, connect to the PLC, write your program and press the buttons to test. Worth noticing what that list actually is: one PLC, and everything else is operator interface and wiring. The interface half - switches, lights, buttons and pots - is precisely what a browser can reproduce for nothing, which is why a free simulator covers the programming side so completely. The terminal blocks are precisely what it cannot, which is why the hardware still matters for wiring and troubleshooting. The full comparison is on the blog.
๐ FULL WRITTEN ARTICLE
accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ฅ๏ธ OPEN THE FREE SIMULATOR
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/aRtPHhYAd7Y
๐ WHAT YOU'LL LEARN
โ Know exactly what you are buying - processor, power supply, digital input switches, output indicators, pushbuttons, pilot lights, analog potentiometers and terminal blocks
โ Follow the standard workflow a trainer teaches - plug in, open the software, connect to the PLC, write the program, press the buttons to test
โ Separate the panel into its two halves - the operator interface, and the wiring
โ Understand why a browser reproduces the interface half completely, switches, lights and analog pots included
โ Understand why it cannot reproduce the terminal blocks, and why that is the half worth paying for
โ FREQUENTLY ASKED
Q: What is on a PLC training panel?
A: A processor, a power supply, digital input switches, output indicators, pushbuttons, pilot lights, analog potentiometers, terminal blocks and sometimes a small motor - all pre-wired so you can write a program and test it immediately.
Q: If a simulator has switches and sliders, what is the panel for?
A: The terminal blocks. A simulator gives you the inputs, outputs and analog values, but stripping wire, landing it on a terminal and metering a fault are physical skills. That is what the hardware teaches and nothing else does.
๐ The full comparison, including where hardware still wins: accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ NPN and PNP sensor wiring - the hardware half: youtu.be/YluDQ7_di1k
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTraining #LearnPLC #PLCSimulator #PLCWiring #Automation #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
What a $5,000 PLC trainer actually contains: a processor, power supply, input switches, output indicators, pushbuttons, pilot lights, pots and terminal blocks.
โก QUICK ANSWER
A typical PLC training panel contains a processor, a power supply, digital input switches, output indicators, pushbuttons, pilot lights, sometimes a small motor, analog potentiometers, and terminal blocks for wiring. You plug it in, open the programming software, connect to the PLC, write your program and press the buttons to test. Worth noticing what that list actually is: one PLC, and everything else is operator interface and wiring. The interface half - switches, lights, buttons and pots - is precisely what a browser can reproduce for nothing, which is why a free simulator covers the programming side so completely. The terminal blocks are precisely what it cannot, which is why the hardware still matters for wiring and troubleshooting. The full comparison is on the blog.
๐ FULL WRITTEN ARTICLE
accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ฅ๏ธ OPEN THE FREE SIMULATOR
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/aRtPHhYAd7Y
๐ WHAT YOU'LL LEARN
โ Know exactly what you are buying - processor, power supply, digital input switches, output indicators, pushbuttons, pilot lights, analog potentiometers and terminal blocks
โ Follow the standard workflow a trainer teaches - plug in, open the software, connect to the PLC, write the program, press the buttons to test
โ Separate the panel into its two halves - the operator interface, and the wiring
โ Understand why a browser reproduces the interface half completely, switches, lights and analog pots included
โ Understand why it cannot reproduce the terminal blocks, and why that is the half worth paying for
โ FREQUENTLY ASKED
Q: What is on a PLC training panel?
A: A processor, a power supply, digital input switches, output indicators, pushbuttons, pilot lights, analog potentiometers, terminal blocks and sometimes a small motor - all pre-wired so you can write a program and test it immediately.
Q: If a simulator has switches and sliders, what is the panel for?
A: The terminal blocks. A simulator gives you the inputs, outputs and analog values, but stripping wire, landing it on a terminal and metering a fault are physical skills. That is what the hardware teaches and nothing else does.
๐ The full comparison, including where hardware still wins: accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ NPN and PNP sensor wiring - the hardware half: youtu.be/YluDQ7_di1k
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTraining #LearnPLC #PLCSimulator #PLCWiring #Automation #Shorts
Regards,
Garry
ACC Automation
accautomation.ca



![Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial
Master Productivity PLC Boost Use Favorites Feature! [Tutorial] ๐ญ๐ช on the Productivity PLC. Step-by-step tutorial with real-world examples.
โก QUICK ANSWER
Modbus on the Productivity PLC maps remote coils and registers into local memory. Choose the port (Modbus RTU over RS-485 or Modbus TCP over Ethernet), match baud/parity/slave-ID on both ends, then use a read/write instruction to move holding registers and coils between devices.
๐ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
๐ WHAT YOULL LEARN
โ
Productivity PLC Boost Use Favorites Feature! [Tutorial] ๐ญ๐ช step by step on the Productivity PLC
โ
Math instructions for calculations
โ
Data move and transfer instructions
โ
Real-world tips from manufacturing experience
โ FREQUENTLY ASKED
Q: RTU or TCP โ which do I use?
A: RTU runs over RS-485 serial; TCP runs over Ethernet. Pick whichever your device supports. Both are shown in the full guide.
Q: Why wonโt my Modbus device respond?
A: Confirm baud rate, parity, and slave ID match exactly, and check A/B wiring polarity on RS-485.
๐ Full step-by-step, code & wiring diagrams: https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
๐ MORE RESOURCES
โถ Series: https://accautomation.ca/series/productivity-plc/
โถ PLC Beginners Guide: https://accautomation.ca/programming/plc-beginners-guide/
โถ Free eBooks: https://accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: https://www.automationdirect.com/
โถ Parts Guide: https://www.accautomation.ca/purchase-find-parts/
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
http://www.accautomation.ca Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial](https://i.ytimg.com/vi/J36YyCylIrI/mqdefault.jpg)






