Uploaded June 2026 | Updated November 2026, 3 days ago
Learn timer instructions on the Productivity Mini PLC (P1-M622-16DR) — the Simple Timer (STMR) as on/off delay and the Timer (TMR) up/down with reset.
⚡ QUICK ANSWER
The Productivity Mini PLC (P1-M622-16DR) offers two timer instructions in Productivity Suite. The Simple Timer (STMR) is the everyday choice: it works as an on-delay (output turns on after the preset once the input is true) or an off-delay (output stays on for the preset after the input turns off). The full Timer (TMR) instruction is more flexible — it can count up or down and includes a dedicated reset, for applications that need more control. Timer values can be retentive (they hold through a stop or power loss) or non-retentive (they clear), depending on what you choose. Here they're built onto a motor-control circuit. The full step-by-step and downloads are in the written guide below.
📖 FULL STEP-BY-STEP + DOWNLOADS (project file, wiring, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions
⏱️ TIMESTAMPS
0:00 - Introduction: Productivity Mini PLC Timer Instructions
0:53 - Timing Diagrams (Productivity Timer)
1:36 - Simple Timer (STMR) — On-Delay Timer
5:57 - Simple Timer (STMR) — Off-Delay Timer
9:19 - Timer (TMR) — Up/Down Timer with Reset
13:39 - Retentive vs Non-Retentive Timer Values
14:45 - Summary: Choosing the Right Timer
📚 WHAT YOU'LL LEARN
✅ The two Productivity timer instructions — Simple Timer (STMR) and Timer (TMR)
✅ Use the Simple Timer as an on-delay timer
✅ Use the Simple Timer as an off-delay timer
✅ Use the Timer (TMR) as an up/down timer with a dedicated reset
✅ The difference between retentive and non-retentive timer values
❓ FREQUENTLY ASKED
Q: What timer instructions does the Productivity PLC have?
A: Two — the Simple Timer (STMR), which handles on-delay and off-delay timing, and the full Timer (TMR), which can count up or down and has a dedicated reset. The full walkthrough is in the guide.
Q: What's the difference between an on-delay and an off-delay timer?
A: An on-delay turns its output on after the preset once the input is true; an off-delay keeps its output on for the preset after the input turns off. The Simple Timer does both.
Q: What's the difference between a retentive and non-retentive timer?
A: A retentive timer holds its accumulated value through a stop or power loss and resumes; a non-retentive timer clears to zero. You choose based on the application.
👉 Full step-by-step & downloads: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions
🔗 MORE RESOURCES
▶ Series: accautomation.ca/series/productivity-plc
▶ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
▶ Free eBooks: accautomation.ca (subscribe for download)
🛒 RECOMMENDED HARDWARE
▶ Shop: automationdirect.com
▶ Parts Guide: accautomation.ca/purchase-find-parts
💬 Questions? Drop a comment below.
🔔 New tutorials every Monday — Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTimer #LearnPLC #MotorControl
▶ FULL SERIES — Productivity 1000 PLC Programming (start at Episode 1):
youtube.com/watch?v=BdLH0OqeXLg&list=PLdarz-DlHbBM
Regards,
Garry
ACC Automation
accautomation.ca
Learn timer instructions on the Productivity Mini PLC (P1-M622-16DR) — the Simple Timer (STMR) as on/off delay and the Timer (TMR) up/down with reset.
⚡ QUICK ANSWER
The Productivity Mini PLC (P1-M622-16DR) offers two timer instructions in Productivity Suite. The Simple Timer (STMR) is the everyday choice: it works as an on-delay (output turns on after the preset once the input is true) or an off-delay (output stays on for the preset after the input turns off). The full Timer (TMR) instruction is more flexible — it can count up or down and includes a dedicated reset, for applications that need more control. Timer values can be retentive (they hold through a stop or power loss) or non-retentive (they clear), depending on what you choose. Here they're built onto a motor-control circuit. The full step-by-step and downloads are in the written guide below.
📖 FULL STEP-BY-STEP + DOWNLOADS (project file, wiring, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions
⏱️ TIMESTAMPS
0:00 - Introduction: Productivity Mini PLC Timer Instructions
0:53 - Timing Diagrams (Productivity Timer)
1:36 - Simple Timer (STMR) — On-Delay Timer
5:57 - Simple Timer (STMR) — Off-Delay Timer
9:19 - Timer (TMR) — Up/Down Timer with Reset
13:39 - Retentive vs Non-Retentive Timer Values
14:45 - Summary: Choosing the Right Timer
📚 WHAT YOU'LL LEARN
✅ The two Productivity timer instructions — Simple Timer (STMR) and Timer (TMR)
✅ Use the Simple Timer as an on-delay timer
✅ Use the Simple Timer as an off-delay timer
✅ Use the Timer (TMR) as an up/down timer with a dedicated reset
✅ The difference between retentive and non-retentive timer values
❓ FREQUENTLY ASKED
Q: What timer instructions does the Productivity PLC have?
A: Two — the Simple Timer (STMR), which handles on-delay and off-delay timing, and the full Timer (TMR), which can count up or down and has a dedicated reset. The full walkthrough is in the guide.
Q: What's the difference between an on-delay and an off-delay timer?
A: An on-delay turns its output on after the preset once the input is true; an off-delay keeps its output on for the preset after the input turns off. The Simple Timer does both.
Q: What's the difference between a retentive and non-retentive timer?
A: A retentive timer holds its accumulated value through a stop or power loss and resumes; a non-retentive timer clears to zero. You choose based on the application.
👉 Full step-by-step & downloads: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions
🔗 MORE RESOURCES
▶ Series: accautomation.ca/series/productivity-plc
▶ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
▶ Free eBooks: accautomation.ca (subscribe for download)
🛒 RECOMMENDED HARDWARE
▶ Shop: automationdirect.com
▶ Parts Guide: accautomation.ca/purchase-find-parts
💬 Questions? Drop a comment below.
🔔 New tutorials every Monday — Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTimer #LearnPLC #MotorControl
▶ FULL SERIES — Productivity 1000 PLC Programming (start at Episode 1):
youtube.com/watch?v=BdLH0OqeXLg&list=PLdarz-DlHbBM
Regards,
Garry
ACC Automation
accautomation.ca


![Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial
Master Productivity PLC Boost Use Favorites Feature! [Tutorial] 🏭🪜 on the Productivity PLC. Step-by-step tutorial with real-world examples.
⚡ QUICK ANSWER
Modbus on the Productivity PLC maps remote coils and registers into local memory. Choose the port (Modbus RTU over RS-485 or Modbus TCP over Ethernet), match baud/parity/slave-ID on both ends, then use a read/write instruction to move holding registers and coils between devices.
📖 FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
📚 WHAT YOULL LEARN
✅ Productivity PLC Boost Use Favorites Feature! [Tutorial] 🏭🪜 step by step on the Productivity PLC
✅ Math instructions for calculations
✅ Data move and transfer instructions
✅ Real-world tips from manufacturing experience
❓ FREQUENTLY ASKED
Q: RTU or TCP — which do I use?
A: RTU runs over RS-485 serial; TCP runs over Ethernet. Pick whichever your device supports. Both are shown in the full guide.
Q: Why won’t my Modbus device respond?
A: Confirm baud rate, parity, and slave ID match exactly, and check A/B wiring polarity on RS-485.
👉 Full step-by-step, code & wiring diagrams: https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
🔗 MORE RESOURCES
▶ Series: https://accautomation.ca/series/productivity-plc/
▶ PLC Beginners Guide: https://accautomation.ca/programming/plc-beginners-guide/
▶ Free eBooks: https://accautomation.ca (subscribe for download)
🛒 RECOMMENDED HARDWARE
▶ Shop: https://www.automationdirect.com/
▶ Parts Guide: https://www.accautomation.ca/purchase-find-parts/
💬 Questions? Drop a comment below.
🔔 New tutorials every Monday — Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
http://www.accautomation.ca Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial](https://i.ytimg.com/vi/J36YyCylIrI/mqdefault.jpg)







