Uploaded June 2026 | Updated November 2026, 3 hours ago
Learn how to use a timer with a Greater-Than compare on the P1-M622-16DR Mini PLC to fire an overtime alarm when a process runs longer than expected.
⥠QUICK ANSWER
On the P1-M622-16DR Mini PLC, an overtime alarm is built by running a timer while the process is active, then putting a Greater-Than compare on the timer's accumulated value: when elapsed time exceeds your preset limit, the compare goes true and energizes the alarm output. That gives you a one-rung "process has run too long" warning without a separate fault routine. The full setup â tag names, the exact Greater instruction, and the downloadable project file â is in the written guide.
đ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-âąī¸
âļ WATCH THE FULL VIDEO â P1-M622-16DR Mini PLC Timer Instructions
youtu.be/Hl9-X4cxuxQ
đ WHAT YOU'LL LEARN
â Run a timer to track how long a process has been active
â Apply a Greater-Than compare to the timer's accumulated value
â Energize an alarm output when run time passes the expected limit
â Build a one-rung process-overtime safety warning on the P1-M622-16DR
â Know when a Greater compare beats the timer's fixed done bit
â FREQUENTLY ASKED
Q: Why use a Greater compare instead of the timer's done bit?
A: The done bit fires at one fixed preset. A Greater compare tests the running time against any value â or a tag you can change live â so you can adjust the overtime limit without editing the timer.
Q: What timer works best for an overtime alarm?
A: An on-delay style timer that runs while the process is active works well â you compare its accumulated value, not just its done bit.
đ Full step-by-step, code & wiring diagrams: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-âąī¸
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-1000-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTimer #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca
Learn how to use a timer with a Greater-Than compare on the P1-M622-16DR Mini PLC to fire an overtime alarm when a process runs longer than expected.
⥠QUICK ANSWER
On the P1-M622-16DR Mini PLC, an overtime alarm is built by running a timer while the process is active, then putting a Greater-Than compare on the timer's accumulated value: when elapsed time exceeds your preset limit, the compare goes true and energizes the alarm output. That gives you a one-rung "process has run too long" warning without a separate fault routine. The full setup â tag names, the exact Greater instruction, and the downloadable project file â is in the written guide.
đ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-âąī¸
âļ WATCH THE FULL VIDEO â P1-M622-16DR Mini PLC Timer Instructions
youtu.be/Hl9-X4cxuxQ
đ WHAT YOU'LL LEARN
â Run a timer to track how long a process has been active
â Apply a Greater-Than compare to the timer's accumulated value
â Energize an alarm output when run time passes the expected limit
â Build a one-rung process-overtime safety warning on the P1-M622-16DR
â Know when a Greater compare beats the timer's fixed done bit
â FREQUENTLY ASKED
Q: Why use a Greater compare instead of the timer's done bit?
A: The done bit fires at one fixed preset. A Greater compare tests the running time against any value â or a tag you can change live â so you can adjust the overtime limit without editing the timer.
Q: What timer works best for an overtime alarm?
A: An on-delay style timer that runs while the process is active works well â you compare its accumulated value, not just its done bit.
đ Full step-by-step, code & wiring diagrams: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-âąī¸
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-1000-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTimer #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca










