Using 3ds Max Design with Civil 3D - Part 08 - Creating an Assembly @Autodesk3dsMax

Uploaded December 2014 | Updated September 2026, 3 weeks ago

In this movie, you create an Assembly.This is the third and last component you need to create a corridor. An Assembly is basically a cross-section of the road you need, where you define shoulders, lanes, gutters and sidewalks among others.
Level: Intermediate
Recorded in: Civil 3D 2015
Files used: areadownloads.autodesk.com/wdm/3dsmax/HTM-INT_civilview.zip

This tutorial is intended for use with 3ds Max version 2015 or higher.

► For additional learning content visit AREA by Autodesk | http://autode.sk/AREA3dsMaxTutorials ► Visit AREA by Autodesk to find answers to your questions on our forums, showcase your work in the gallery, read blogs written by the creators of 3ds Max, and find more learning content. | forums.autodesk.com/t5/3ds-max/ct-p/area-c1

Using 3ds Max Design with Civil 3D - Part 08 - Creating an Assembly

Product Viz in 3ds Max - Part 4: Rendering a still frame

3ds Max 2018 - MAXtoA Plugin - Arnold Lighting - Part 2/4

Using 3ds Max Design with Civil 3D - Part 22 - Adding Trees

Using 3ds Max Design with Civil 3D - Part 19 - Creating an Animated Water Surface

3ds Max Getting Started - Lesson 13 - Polygon Modeling Part 2

3ds Max Getting Started - Lesson 16 - Maps

Using 3ds Max Design with Civil 3D - Part 02 - Basic Setup

3ds Max Getting Started - Lesson 22 - Introduction to Rendering