Uploaded July 2025 | Updated November 2026, 21 hours ago
Sorry for the mess of video clips but I thought it was worth showing this.
I had to get this running or replaced quickly for a disabled friend who I bought this for 9 months ago.
I decided to open it up and see if I could repair it after I got no response from the Amazon seller Clear Chan but did get some support from Ulefone.
They are sending a replacement USB socket PCB and I will fit that the next time the USB socket becomes dry jointed.
All, but one, of the joints was broken.
USB sockets like this one can be purchased but time was the issue here.
I used Chipquik on the metal lugs and the one solid leg broke the pad off when the socket came out. I scrapped the broken PCB land back to give some space to solder the pin back on. The socket was aligned more left to help that.
I used a slightly higher heat than Ulefone suggested and used a new razor blade to get under the screen.
I used superglue tape to secure the screen back in but have now seen various specialist glues on Amazon for this purpose.
The next time the USB socket fails I will fit the new USB PCB that Ulefone are sending out and try the correct glues.
Sorry for the mess of video clips but I thought it was worth showing this.
I had to get this running or replaced quickly for a disabled friend who I bought this for 9 months ago.
I decided to open it up and see if I could repair it after I got no response from the Amazon seller Clear Chan but did get some support from Ulefone.
They are sending a replacement USB socket PCB and I will fit that the next time the USB socket becomes dry jointed.
All, but one, of the joints was broken.
USB sockets like this one can be purchased but time was the issue here.
I used Chipquik on the metal lugs and the one solid leg broke the pad off when the socket came out. I scrapped the broken PCB land back to give some space to solder the pin back on. The socket was aligned more left to help that.
I used a slightly higher heat than Ulefone suggested and used a new razor blade to get under the screen.
I used superglue tape to secure the screen back in but have now seen various specialist glues on Amazon for this purpose.
The next time the USB socket fails I will fit the new USB PCB that Ulefone are sending out and try the correct glues.










