Uploaded January 2014 | Updated September 2026, 2 weeks ago
FACEBOOK: facebook.com/MAT2COMPOSITES
TWITTER: @matthieutje65
INSTAGRAM: MatthieuLibeert
WEBSITE: matthieulibeert.webs.com
Watch introduction video of this project here!
youtube.com/watch?v=Ef2nEStH_8E
Links:
VOSSCHEMIE: vosschemie-benelux.com
CNC Full Video: youtube.com/watch?v=g3Y06zVvM-c
New video online every Wednesday at 18:00 Belgian time!
Schedule:
1 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction)
https://www.youtube.com/watch?v=Ef2nE...
8 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 2-7 (CNC+2K Paint)
https://www.youtube.com/watch?v=fWiPl...
15 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 3-7 (Casting ALU VG)
https://www.youtube.com/watch?v=WzvLM...
22 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 4-7 (Prepreg mould)
youtube.com/watch?v=cJNPugX_M-c
29 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex moulds)
youtube.com/watch?v=iclRXG6puNw
5 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 6-7 (First Parts and Clear)
youtube.com/watch?v=Hbq05i0Kj1Q
12 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 7-7 (Silicone bag and parts)
youtube.com/watch?v=KKRlE-_Ro1A
In this video you can see how I make my design from paper to CAD-software (Siemens Nx) to Rendering images in 3DS Max 2011. After that you can see how Multiplex wooden moulds are CNC-milled and finished with a 2K (2 component) primer spraycan.
The finishing is then done with some dry and wet sanding starting with grid 600 till 2000. After that there is some buffing to bring the mould to a high gloss, ready to be moulded with VG ALU EPOXY from vosschemie (next tutorial)
Hi Everyone, After the succes of a previous 6-part tutorial from mouldmaking till prepreg parts, here are some new ones! you can see the introduction of the previous tutorials by clicking on following link: https://www.youtube.com/watch?v=1PpKM...
In the videos coming online you will get some information on 2K spraypaint, How the first moulds were CNC-Milled, The use of Vosschemie VG ALU EPOXY, using Prepreg Carbonfiber to make moulds, how an other mould was made to enable silicone vacuumbags, how parts are clearcoated and many more. So if all of this sounds interesting, don't forget to subscribe ;)
Track ID on background: Blackmill - Spirit Of Live
FACEBOOK: facebook.com/MAT2COMPOSITES
TWITTER: @matthieutje65
INSTAGRAM: MatthieuLibeert
WEBSITE: matthieulibeert.webs.com
Watch introduction video of this project here!
youtube.com/watch?v=Ef2nEStH_8E
Links:
VOSSCHEMIE: vosschemie-benelux.com
CNC Full Video: youtube.com/watch?v=g3Y06zVvM-c
New video online every Wednesday at 18:00 Belgian time!
Schedule:
1 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction)
https://www.youtube.com/watch?v=Ef2nE...
8 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 2-7 (CNC+2K Paint)
https://www.youtube.com/watch?v=fWiPl...
15 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 3-7 (Casting ALU VG)
https://www.youtube.com/watch?v=WzvLM...
22 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 4-7 (Prepreg mould)
youtube.com/watch?v=cJNPugX_M-c
29 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex moulds)
youtube.com/watch?v=iclRXG6puNw
5 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 6-7 (First Parts and Clear)
youtube.com/watch?v=Hbq05i0Kj1Q
12 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 7-7 (Silicone bag and parts)
youtube.com/watch?v=KKRlE-_Ro1A
In this video you can see how I make my design from paper to CAD-software (Siemens Nx) to Rendering images in 3DS Max 2011. After that you can see how Multiplex wooden moulds are CNC-milled and finished with a 2K (2 component) primer spraycan.
The finishing is then done with some dry and wet sanding starting with grid 600 till 2000. After that there is some buffing to bring the mould to a high gloss, ready to be moulded with VG ALU EPOXY from vosschemie (next tutorial)
Hi Everyone, After the succes of a previous 6-part tutorial from mouldmaking till prepreg parts, here are some new ones! you can see the introduction of the previous tutorials by clicking on following link: https://www.youtube.com/watch?v=1PpKM...
In the videos coming online you will get some information on 2K spraypaint, How the first moulds were CNC-Milled, The use of Vosschemie VG ALU EPOXY, using Prepreg Carbonfiber to make moulds, how an other mould was made to enable silicone vacuumbags, how parts are clearcoated and many more. So if all of this sounds interesting, don't forget to subscribe ;)
Track ID on background: Blackmill - Spirit Of Live
