Uploaded December 2024 | Updated September 2026, 2 weeks ago
Skeletonize everything I say! It looks and stays cool...
We'll have a close look at what makes these upgrades so different and then we'll install them and test them against the stock setup to see how much of an improvement they make.
These three upgrades are available separately as well, do one, or all three like I did if you think it's right for you.
FYI these were sent to me by BIQU; companies often send me products to test out, I usually don't make a video unless I think they are any good, and BIQU has a pretty good reputation, so I thought it was worth sharing with everyone.
As this channel grows, I will purchase more and have less products supplied. The goal is to buy as much as possible with the money I earn from this channel so I can remain as unbiased as possible.
Help support this channel! patreon.com/Needitmakeit
Attempt at your own risk! makerworld.com/en/models/855927#profileId-805183
For a great budget gift, these are at the top! Note: Do not buy the ball end version! These three will do 99% of the jobs, there is no need to waste your money on the entire set!
Wera #2054 - 1.5mm - amzn.to/3Vo18QI
Wera #2054 - 2mm - amzn.to/3D5QI1O
Wera #2054 - 2.5mm - amzn.to/3ZKAdkI
**QIDI PLUS4** - qidi3d.com/products/plus4-3d-printer?sca_ref=5735403.eknTRISP1e
Early Bird - A choice of either a Tungsten Carbide Bimetal Nozzle or a Bimetal Hot End (Shipping begins in 2 months for these)
Possible Coupon - 30DAYSGIFT
Possible Coupon - HIGH5
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
Thermal Master P2 - shrsl.com/4o6j1
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos - shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well) - shrsl.com/4jhht
Panda Jetpack for P1 and X1 (I need more time for long-term testing) - shrsl.com/4s1ck
Panda Claw for P1, X1 and A1 (When selected) - shrsl.com/4s1cl
Panda Extruder for P1, X1 - shrsl.com/4s1co
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
#bambu
#bambulab
#3dprinting
Skeletonize everything I say! It looks and stays cool...
We'll have a close look at what makes these upgrades so different and then we'll install them and test them against the stock setup to see how much of an improvement they make.
These three upgrades are available separately as well, do one, or all three like I did if you think it's right for you.
FYI these were sent to me by BIQU; companies often send me products to test out, I usually don't make a video unless I think they are any good, and BIQU has a pretty good reputation, so I thought it was worth sharing with everyone.
As this channel grows, I will purchase more and have less products supplied. The goal is to buy as much as possible with the money I earn from this channel so I can remain as unbiased as possible.
Help support this channel! patreon.com/Needitmakeit
Attempt at your own risk! makerworld.com/en/models/855927#profileId-805183
For a great budget gift, these are at the top! Note: Do not buy the ball end version! These three will do 99% of the jobs, there is no need to waste your money on the entire set!
Wera #2054 - 1.5mm - amzn.to/3Vo18QI
Wera #2054 - 2mm - amzn.to/3D5QI1O
Wera #2054 - 2.5mm - amzn.to/3ZKAdkI
**QIDI PLUS4** - qidi3d.com/products/plus4-3d-printer?sca_ref=5735403.eknTRISP1e
Early Bird - A choice of either a Tungsten Carbide Bimetal Nozzle or a Bimetal Hot End (Shipping begins in 2 months for these)
Possible Coupon - 30DAYSGIFT
Possible Coupon - HIGH5
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
Thermal Master P2 - shrsl.com/4o6j1
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos - shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well) - shrsl.com/4jhht
Panda Jetpack for P1 and X1 (I need more time for long-term testing) - shrsl.com/4s1ck
Panda Claw for P1, X1 and A1 (When selected) - shrsl.com/4s1cl
Panda Extruder for P1, X1 - shrsl.com/4s1co
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
#bambu
#bambulab
#3dprinting
