Uploaded March 2024 | Updated September 2026, 2 weeks ago
The Ender 3 V3 KE desperately needed this upgrade!
Help support this channel! patreon.com/Needitmakeit
This is the 3rd video now on this printer, but in this video we come up with a working solution for the bed vibration issues we were having which produced print quality problems. Not all Ender 3 printers seemed to have this issue, but with the small rods and a little bit of time and wear this will become a problem on all printers and I thought it was a good idea to be prepared with a good solid solution that was easy to do for just about anyone.
**SPECIAL NOTE: This has only been tested on my printer, if your printer looks different or things don't fit as you expect, leave a comment and I'll work with you.
Hardware You'll need:
M3 x 12mm (4pcs) - For Front Adapter & Y Axis motor
M4 x 20mm (4pcs) - For Rear rail to base adapter
M3 x 8mm (16pcs) - For Plate Adapters to Carriages
M3 x 8mm (12pcs) - For Rails to Front/Rear Adapters
M3 x 4mm Heat-Set Brass (20pcs) - For All Adapter Plates
US Amazon Link for Linear Rails: (This link supports the channel)
amzn.to/4a5YP9w - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Aliexpress Link for Linear Rails: (This link supports the channel) - They don't have stock of the 350, you can buy 400 and cut it to size, hopefully stock comes back soon!
https://s.click.aliexpress.com/e/_DDtCTWZ - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Printed Parts:
makerworld.com/en/models/239219#profileId-255056
printables.com/model/797949-creality-ender-3-v3-ke-linear-rail-upgrade
Bambu Display Model by Henlor - Nice Model! makerworld.com/en/models/222844#profileId-240884
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
#crealityEnder3
#crealityk1
#Ender3
The Ender 3 V3 KE desperately needed this upgrade!
Help support this channel! patreon.com/Needitmakeit
This is the 3rd video now on this printer, but in this video we come up with a working solution for the bed vibration issues we were having which produced print quality problems. Not all Ender 3 printers seemed to have this issue, but with the small rods and a little bit of time and wear this will become a problem on all printers and I thought it was a good idea to be prepared with a good solid solution that was easy to do for just about anyone.
**SPECIAL NOTE: This has only been tested on my printer, if your printer looks different or things don't fit as you expect, leave a comment and I'll work with you.
Hardware You'll need:
M3 x 12mm (4pcs) - For Front Adapter & Y Axis motor
M4 x 20mm (4pcs) - For Rear rail to base adapter
M3 x 8mm (16pcs) - For Plate Adapters to Carriages
M3 x 8mm (12pcs) - For Rails to Front/Rear Adapters
M3 x 4mm Heat-Set Brass (20pcs) - For All Adapter Plates
US Amazon Link for Linear Rails: (This link supports the channel)
amzn.to/4a5YP9w - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Aliexpress Link for Linear Rails: (This link supports the channel) - They don't have stock of the 350, you can buy 400 and cut it to size, hopefully stock comes back soon!
https://s.click.aliexpress.com/e/_DDtCTWZ - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Printed Parts:
makerworld.com/en/models/239219#profileId-255056
printables.com/model/797949-creality-ender-3-v3-ke-linear-rail-upgrade
Bambu Display Model by Henlor - Nice Model! makerworld.com/en/models/222844#profileId-240884
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
#crealityEnder3
#crealityk1
#Ender3
