đź”¶ Temperature & Humidity Control Unit Using a Raspberry Pi Pico @MyVanitar
đź”¶ Temperature & Humidity Control Unit Using a Raspberry Pi Pico  @MyVanitar
Uploaded August 2022 | Updated November 2026, 2 days ago
Temperature & Humidity Control Unit Using a Raspberry Pi Pico
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
OctoPart: octopart.com
======================================
Article: pcbway.com/blog/technology/Temperature_Humidity_Control_Unit_Using_a_Raspberry_Pi_Pico_66fdee4a.html
======================================
Raspberry Pi Pico is a cute piece of hardware. It is equipped with a powerful dual-core RP2040 microcontroller that offers 2M (up to 16M) Flash and 264K SRAM memories. Such specifications make it suitable for a variety of hobby and industrial applications.
In this article/video, I used a Pico board, a digital SHTC3 sensor, and a 2.4” colorful TFT display to build a graphical temperature and humidity measurement/control unit that can be used to monitor the home, workplace, indoor garden, devices … etc. The board was also equipped with two Relays that allow the user to set the cooling/heating limits and adjust the parameters in the GUI (HMI).
The trickiest part of this project was the Pico code. I used the Pico C/C++ SDK library and invested a significant amount of time in designing the GUI and debugging the code. I should confess it was not an easy task.
To design the schematic and PCB, I used Altium designer 22 and installed the missing component libraries using Altium’s manufacturer part search. By using the Octopart website, I was able to quickly gather the necessary component information and generate the BOM. Finally, to get high-quality fabricated boards, I sent the Gerber files to PCBWay.
It's a cool piece of hardware for anyone, so let’s get started :-)
đź”¶ Temperature & Humidity Control Unit Using a Raspberry Pi PicoIR Remote Control Decoder/Switcher CircuitLow Noise AC to DC Rectifier Using Capacitance Multiplier [Altium Designer]Active Low Pass Filter Circuit Analysis using Siglent SDS2102X Plus Oscilloscope [Part-1]AC RMS Current Measurement Using the Siglent SDS2000X Plus OscilloscopeHand Sanitizer/Alcohol Dispenser Circuit/DIY, Without an Arduino/MCU [Fight with COVID-19]Police LED Flasher Circuit [72 LEDs, STM8S001]2GHz, 5th-order Chebyshev Microstrip Bandpass Filter (FR-4)220Vac to 5Vdc Transformerless Power Supply Circuit Using LNK304 [read the disclaimer below]đź”¶ Wireless Home Automation (Control and Monitoring) Using a Nextion HMI Display40V-30A Adjustable Switching Power SupplySwitching Power Supply Circuit Using LM2576/LM2596 [Adjustable, Buck Converter, CC-CV]
MyVanitar |

đź”¶ Temperature & Humidity Control Unit Using a Raspberry Pi Pico

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER