Uploaded March 2017 | Updated November 2026, 17 hours ago
This is my first attempt at trying to make a Tanto style blade. I ran into a lot of issues on this one. The biggest issue being that I lost a good chunk of footage so I had to re-shoot some of it which is why the blade looks different in some scenes. Originally the blade was supposed to be wider but I started chasing the bevels and sacrificed the edge in the process. There are also a few heavy scratches on the blade because I accidently used a lower grit sand paper on the blade, that's my fault for not paying attention. I tried removing the scratches but I didn't want to thin out the blade anymore so I left them. The handle is made from a Micarta that I made myself. That part actually turned out alright. I could keep going on about my mistakes but in the end I will chalk this one up to a learning experience. The knife is functional but is aesthetically lacking and could use some improvement in terms of build quality. Thanks for watching.
Music:
The Temperature of the Air on the Bow of the Kaleetan by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Source: chriszabriskie.com/uvp
Artist: chriszabriskie.com
John Stockton Slow Drag by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Source: chriszabriskie.com/uvp
Artist: chriszabriskie.com
This is my first attempt at trying to make a Tanto style blade. I ran into a lot of issues on this one. The biggest issue being that I lost a good chunk of footage so I had to re-shoot some of it which is why the blade looks different in some scenes. Originally the blade was supposed to be wider but I started chasing the bevels and sacrificed the edge in the process. There are also a few heavy scratches on the blade because I accidently used a lower grit sand paper on the blade, that's my fault for not paying attention. I tried removing the scratches but I didn't want to thin out the blade anymore so I left them. The handle is made from a Micarta that I made myself. That part actually turned out alright. I could keep going on about my mistakes but in the end I will chalk this one up to a learning experience. The knife is functional but is aesthetically lacking and could use some improvement in terms of build quality. Thanks for watching.
Music:
The Temperature of the Air on the Bow of the Kaleetan by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Source: chriszabriskie.com/uvp
Artist: chriszabriskie.com
John Stockton Slow Drag by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Source: chriszabriskie.com/uvp
Artist: chriszabriskie.com










