Uploaded September 2018 | Updated November 2026, 17 hours ago
Ender 3D Printer Promo:
gearbest.com/3d-printers-3d-printer-kits/pp_1845899.html?wid=1433363&lkid=10116770
Promo code GBEnder3
I had originally wanted to do a copper inlay on the box lid but as you may have seen from the video that didn't pan out. So instead I carved the box lid. It wasn't exactly what I wanted but it turned out okay. I did learn one thing though. I tried salvaging the first lid I made by carving it and I got a lot of chipping and pieces of wood breaking off. After doing a little testing I found that if I applied a couple of coats of tung oil to the wood it would soften, so to speak, and carved a lot nicer with no chipping. Although the final product didn't come out exactly like I wanted I did learn something along the way. Thanks for watching.
Ender 3D Printer Promo:
gearbest.com/3d-printers-3d-printer-kits/pp_1845899.html?wid=1433363&lkid=10116770
Promo code GBEnder3
I had originally wanted to do a copper inlay on the box lid but as you may have seen from the video that didn't pan out. So instead I carved the box lid. It wasn't exactly what I wanted but it turned out okay. I did learn one thing though. I tried salvaging the first lid I made by carving it and I got a lot of chipping and pieces of wood breaking off. After doing a little testing I found that if I applied a couple of coats of tung oil to the wood it would soften, so to speak, and carved a lot nicer with no chipping. Although the final product didn't come out exactly like I wanted I did learn something along the way. Thanks for watching.










