Tree Silhouette - Wall Art - Making It Yourself - Limited Tools @danthemakerman
Tree Silhouette - Wall Art - Making It Yourself - Limited Tools  @danthemakerman
Uploaded December 2015 | Updated November 2026, 2 days ago
This is a limited tools project. All you need is a jigsaw, drill, and clamps. This project has a lot of bang for the buck. If you have a large wall and don’t know what to hang on it you can make a huge impact with this wall hanging. You can paint it any color to match your décor or add a backing to it with an accent color. I say you get a lot of bang for your buck because a 4 foot by 8 foot sheet of MDF cost less than $30 and you only use half sheet. You can ask the employees at the home center to cut the full sheet in half for you when you purchase it. The jigsaw I use is one I purchased several years ago for about $30-$40 it’s not the best but for MDF it’s more than enough.

I got the inspiration for this while at a craft store. I found the mini-tree I show in the beginning of the video in a three pack and really liked it the first thing that popped in to my mind was this needs to be bigger. So I scanned it and then enlarged it. I printed out the sheets and taped them together to make the template. The great thing about this project is that it is an organic shape which lends itself to irregularity. In other words it doesn’t have to be perfect you don’t have to cut exactly on the lines. Any imperfections only add to the final piece. I even changed the shape of the leaves from rounded ends to pointed ends because they are easier to cut out with a jigsaw. So if you have never used a jigsaw before then this is a good beginner project any mistakes can be hidden by the organic shape of the leaves and the tree. The only time you have to follow the line is when you cut the circle or you could just make it a large square and forgo that part.

Also you should know that MDF is extremely dusty so it’s best to work outside if possible and either wear a dust mask or if you have it a respirator. This project can be completed in a weekend or in one day if you start early. It took me about 2 hours to cut out all the shapes and that was with a few rest breaks in between. I really liked the way the final piece turned out. I’m not sure if I will keep it or give it away. I hope you all enjoy the video and it inspires you to create your own version.


Over Time by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: audionautix.com
Tree Silhouette - Wall Art - Making It Yourself - Limited ToolsPizza Cutter inspired by Lord of The Rings. Ecthed Elven glyphs.Using 10 Minute Casting Resin to Make a Mallet Hammer HeadWork Lamp from Old Curtain Rod - Making It YourselfUV lightWolverine Wall Art - Pallet Wood - Making It YourselfToyota Tundra 3D Printed Wireless Charging TrayBottle Opener from Bar ClampCaptain America laser engraver/cutter project.How to make a Mini Naginata with a Floating StandThis is truly one of kind, I will never make another oneike this. its made from mahogany & purple 💜I made a take-down version of my layout tool.
Daniel Quiroz |

Tree Silhouette - Wall Art - Making It Yourself - Limited Tools

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER