Uploaded February 2016 | Updated November 2026, 17 hours ago
I didn’t realize how important task lighting was until I started making videos. It made me realize how important light can be from a safety point of view as well. The more light you can shine on a work area the better off you are going to be. My problem was that even though I had pretty good overhead lighting I had hardly any task lighting. So I decided to make a portable work/task lamp using an old curtain rod and some old cement I had leftover from another project. Well as you can see from the video my first attempt was a failure. I’m not sure if the cement was too old or I mixed it incorrectly, either way it didn’t work. It crumbled and never really set. So I regrouped and gave it a second shot. The second time I used bucket from the Dollar Store and a new bag of cement. I also added more screws to the base of the rod so the cement would have more structure to grab on too. This worked out a lot better. The base is heavy enough that it won’t be accidently tipped over and it adjust to about a height of 7 feet. It has a relatively small foot print so I can place it fairly close to where ever I am working. The clamp style light fixture I use can be clamp anywhere on to the curtain rod and swivels around to pretty much any position. I could even add more than one light to the curtain rod if I needed too. I added the wooden blocks on the bottom in case I want to add some wheels later. I can screw into the wood as opposed to the cement. I might just add two wheels across the middle to make it easier to move around. I don’t know yet it’s heavy but not too heavy to pick up and move around. I really think I will be getting a lot of use out of this lamp not only for task lighting but also for setting up lighting for photos. After starting this project I realized that light stands aren’t that expensive. You can buy a set of two photography light stands with cases for around $27 on Amazon which is very reasonable.
amazon.com/CowboyStudio-Photography-Light-Stands-Cases/dp/B001WB02Z4/ref=sr_1_4?s=photo&ie=UTF8&qid=1456515072&sr=1-4&keywords=light+stands
Well I hope you enjoyed this project, thank you for watching and please feel free to share this video.
I didn’t realize how important task lighting was until I started making videos. It made me realize how important light can be from a safety point of view as well. The more light you can shine on a work area the better off you are going to be. My problem was that even though I had pretty good overhead lighting I had hardly any task lighting. So I decided to make a portable work/task lamp using an old curtain rod and some old cement I had leftover from another project. Well as you can see from the video my first attempt was a failure. I’m not sure if the cement was too old or I mixed it incorrectly, either way it didn’t work. It crumbled and never really set. So I regrouped and gave it a second shot. The second time I used bucket from the Dollar Store and a new bag of cement. I also added more screws to the base of the rod so the cement would have more structure to grab on too. This worked out a lot better. The base is heavy enough that it won’t be accidently tipped over and it adjust to about a height of 7 feet. It has a relatively small foot print so I can place it fairly close to where ever I am working. The clamp style light fixture I use can be clamp anywhere on to the curtain rod and swivels around to pretty much any position. I could even add more than one light to the curtain rod if I needed too. I added the wooden blocks on the bottom in case I want to add some wheels later. I can screw into the wood as opposed to the cement. I might just add two wheels across the middle to make it easier to move around. I don’t know yet it’s heavy but not too heavy to pick up and move around. I really think I will be getting a lot of use out of this lamp not only for task lighting but also for setting up lighting for photos. After starting this project I realized that light stands aren’t that expensive. You can buy a set of two photography light stands with cases for around $27 on Amazon which is very reasonable.
amazon.com/CowboyStudio-Photography-Light-Stands-Cases/dp/B001WB02Z4/ref=sr_1_4?s=photo&ie=UTF8&qid=1456515072&sr=1-4&keywords=light+stands
Well I hope you enjoyed this project, thank you for watching and please feel free to share this video.










