Making It Yourself - Justice League Coasters - DIY - Acid Etching @danthemakerman
Making It Yourself - Justice League Coasters - DIY - Acid Etching  @danthemakerman
Uploaded November 2017 | Updated November 2026, 5 days ago
I didn't think this was going to work. I recently got a Cricut vinyl cutter and wanted to experiment with it. I watch a lot of knife making videos and I always love watching a blade being acid etched. So I figured I would try etching superhero logos on to some stainless steel. This stainless steel was given to me by my good friend. It is usually used for thresholds. I first cut it to size. I had some glass coasters that I used as a reference size. So I cut 6 pieces at 3-1/2 inches square. I used my new vinyl cutter to cut out the logos. Once cut out I centered them as best I could on each coaster. I made sure to cover any exposed areas. Then I placed it in a Ferric Chloride bath. This bath is equal parts Ferric Chloride and water. I let it sit for about an hour. I think 30-45 minutes would have been plenty. When I remove them from the acid etch I neutralize them in water. Then I remove the vinyl. Next I sand them with 1200 grit sand paper. Once all the sanding is done I cut a piece of sticky back craft foam the same size as the coaster and stick it to the back. I repeat this process for all the coasters. The Cyborg and Aquamna logo coasters didn’t come out so good. I remade the Aqua man coaster but not the Cyborg one. The others came out pretty good. This was all an experiment to see if I could etch steel using vinyl as the masking. Overall I am please with the results, next time I won’t let them soak for so long. Thanks for watching.

Ferric Chloride:
amazon.com/gp/product/B005T8Y20W/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B005T8Y20W&linkId=962b20558ef978eb8a9cc4d36fc0812c

Vinyl Cutter:
amazon.com/gp/product/B01GSOMVRG/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B01GSOMVRG&linkId=b57a5408cd5dcf2b9f181a87fc29115c

Band saw:
amazon.com/gp/product/B00LBHJ688/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00LBHJ688&linkId=0d505bcb95896c7adb60d7f46d2d0d3c

Belt sander:
amazon.com/gp/product/B004D96ZCG/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B004D96ZCG&linkId=4216f471987a2d17b5397491ed1a4ecc
Making It Yourself - Justice League Coasters - DIY - Acid EtchingI made a Mario and Luigi puzzle using dollar store wood blocks.Thor Hammer Pen made from Leather and Aluminum.November 3, 2022Easy Batman Hand Spinner Fidget ToyColor Changing MugLetter Opener made from Junk Mail - Making It YourselfMake It Yourself - Brass Cross - Easy DIYHow to Make the Spring for a Folding Knife - FUN WITH METAL!!!!Texans Logo from Pallet WoodMaking It Yourself - Kiridashi - EasyDie Hard Christmas Ornament #christmas #christmasdecor #diy #custom
Daniel Quiroz |

Making It Yourself - Justice League Coasters - DIY - Acid Etching

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER