Refurbish a Pocket Knife @danthemakerman
Refurbish a Pocket Knife  @danthemakerman
Uploaded March 2018 | Updated November 2026, 17 hours ago
I bought this pocket knife a while ago and in that time the plastic scales started to get sticky and gummy. Aside from the gummy handles the knife was fairly decent. So I decided to try and make new handles for the knife. I had some left over pieces of stainless steel that would do the trick. This project was more about seeing if I could make new scales than to fully restore the knife. It would be my first time trying this but since the knife wasn't particularly expensive I figured I had little to lose. So I began to work. There are a couple of things I don't show in the video, the main one being that I did have to reduce the diameter of two of the brass pins that were too large. I did this by chucking the pins in my drill and then holding a file against the pin as I rotated the brass rod in the drill. I would check the size intermittently until I reached the correct diameter. The other thing I did was hand sand the brass spacer/spring retainer so that it was about the same thickness as the locking lever. This was just a matter of sanding the brass piece until it was the same thickness. There is a ton of handing that also happened off camera which I did not film as that is quite boring. The hand sand is pretty much the final fit and finish of the project. I really like the overall look of the finished piece there are a couple of issues like one of the pins being too close to the edge and the stainless steel was a little on the thin side so this would not make for a comfortable work knife but it is fine for occasional use. With that said, it being so thin makes it very easy to carry and light as well. I hope you enjoyed the video, thank you for watching.
Refurbish a Pocket KnifeLord of the Rings Wooden SwordSmall Wooden Box with Carved LidForged Rebar Tongs - Making It YourselfHeat Treated Saw Blade Snap test.Japanese Style Bench from pallet woodIron Man Wall Art - Making It YourselfBatman Stencil Experiment #2 with colorHow to Inlay Metal in a Carved Stone Heart - Making It YourselfHow Not to Display Tools!Tree Silhouette - Wall Art - Making It Yourself - Limited ToolsPizza Cutter inspired by Lord of The Rings. Ecthed Elven glyphs.
Daniel Quiroz |

Refurbish a Pocket Knife

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER