Uploaded April 2017 | Updated September 2026, 18 hours ago
I use the lost foam casting method to create the ram for my Gingery Shaper. The first time the casting FAILED. But after remaking the pattern, using more sand, and packing the sand in I found SUCCESS! I have a new DSC-RX100M5 camera (affiliate link: amzn.to/2pANubz) thanks to a recommendation from Giaco Whatever and the support of Makercise patrons. Let me know if I got carried away with the slow motion effects.
For time sheets, material costs, and fuel costs as of this part, check out the details here: makercise.com/stunning-triumph-casting-ram-gingery-shaper-part-3
The extended cut of facing the ram is available here: patreon.com/posts/8873080
Sign-up for early access to project videos:
makercise.com/signup
Check out the full shaper project playlist:
youtube.com/playlist?list=PL9d6LkFNP1fEdw-SPCSIUX8NP0x8McHtW
Check out the full lathe project playlist: youtube.com/playlist?list=PL9d6LkFNP1fGjdW2RxqSHdSO9D1FEl36c
Support this project directly: patreon.com/makercise
Below you'll find my affiliate links. If you click the link and make a purchase, I receive a commission. You can read my full disclosure policy here- makercise.com/privacy-policy
The Charcoal Foundry (Book 1) - amzn.to/2iPAiwy
The Metal Lathe (Book 2) - amzn.to/2jEnR6C
The Metal Shaper (Book 3) - amzn.to/2jEniJU
The Milling Machine (Book 4) - amzn.to/2iseuZW
The Drill Press (Book 5) - amzn.to/2jEsTQL
The Dividing Head and Deluxe Accessories (Book 6) - amzn.to/2jf7jpq
Check out Makercise on:
makercise.com/instagram
makercise.com/facebook
makercise.com/twitter
I use the lost foam casting method to create the ram for my Gingery Shaper. The first time the casting FAILED. But after remaking the pattern, using more sand, and packing the sand in I found SUCCESS! I have a new DSC-RX100M5 camera (affiliate link: amzn.to/2pANubz) thanks to a recommendation from Giaco Whatever and the support of Makercise patrons. Let me know if I got carried away with the slow motion effects.
For time sheets, material costs, and fuel costs as of this part, check out the details here: makercise.com/stunning-triumph-casting-ram-gingery-shaper-part-3
The extended cut of facing the ram is available here: patreon.com/posts/8873080
Sign-up for early access to project videos:
makercise.com/signup
Check out the full shaper project playlist:
youtube.com/playlist?list=PL9d6LkFNP1fEdw-SPCSIUX8NP0x8McHtW
Check out the full lathe project playlist: youtube.com/playlist?list=PL9d6LkFNP1fGjdW2RxqSHdSO9D1FEl36c
Support this project directly: patreon.com/makercise
Below you'll find my affiliate links. If you click the link and make a purchase, I receive a commission. You can read my full disclosure policy here- makercise.com/privacy-policy
The Charcoal Foundry (Book 1) - amzn.to/2iPAiwy
The Metal Lathe (Book 2) - amzn.to/2jEnR6C
The Metal Shaper (Book 3) - amzn.to/2jEniJU
The Milling Machine (Book 4) - amzn.to/2iseuZW
The Drill Press (Book 5) - amzn.to/2jEsTQL
The Dividing Head and Deluxe Accessories (Book 6) - amzn.to/2jf7jpq
Check out Makercise on:
makercise.com/instagram
makercise.com/facebook
makercise.com/twitter
