Uploaded September 2026 | Updated November 2026, 3 days ago
00:00 Smart MCB Tongou TO-Q-SY2-JWT.
00:22 Connect the wiring to the Smart Relay
00:47 Install Smart MCB
01:39 Configure protection Smart MCB
02:41 Smart MCB Wi-Fi signal
The Tongou TO-Q-SY2-JWT is a smart switch designed to bring remote switching and power monitoring to your home automation setup.
While form-factored similarly to a DIN-rail Miniature Circuit Breaker (MCB), it is crucial to understand its primary role: it is a Smart Relay intended for switching, scheduling, and basic telemetry, NOT a main protection MCB for household electrical safety. Always retain your standard circuit breaker for dedicated overcurrent and short-circuit protection.
Technical Specifications & Features
The Tongou TO-Q-SY2-JWT provides comprehensive real-time monitoring and safety parameter configuration via the Tuya app:
Telemetry Monitoring: Live readings for Active Power (W), Energy Consumption (kWh), Line Voltage (V), Current (A), and Internal Device Temperature.
Accuracy Rating: Class 2 metering accuracy with a 2% margin of error. Data readings are designed for monitoring and estimation purposes rather than utility billing.
Smart Protection Controls: Customizable limits for over-current, over-voltage, under-voltage, and thermal protection parameters.
Automation: Support for customized scheduling, countdown timers, and remote ON/OFF toggling.
Step-by-Step Installation & Wiring Guide
Step 1: Pre-Installation Wi-Fi Check
Before mounting the device, verify the 2.4 GHz Wi-Fi signal strength at your circuit breaker box.
Minimum Requirement: The Wi-Fi signal must be at least -70 dBm at the device location.
Signal Threshold: A signal weaker than -75 dBm will lead to frequent offline status and connection dropouts.
Step 2: Physical Wiring
1. Shut off the main power supply before touching any wiring.
2. Route the Live (Phase) and Neutral conductors into their respective input terminals according to the wiring diagram on the device casing.
3. Ensure all terminal screws are securely tightened to avoid high contact resistance.
App Pairing & Configuration (Tuya / Smart Life)
1. Enter Pairing Mode: Turn on the power. Press and hold the front-panel button for 10 seconds until the indicator light flashes rapidly.
2. Device Discovery: Open the Tuya App (or Smart Life app) and select Add Device. The app will automatically detect the Smart Relay.
3. Network Credentials: Enter your local Wi-Fi SSID and password to finalize connection.
4. Device Naming: Rename the device (e.g., "Main Water Heater Relay" or "Outdoor Lighting Switch") for clear identification and voice assistant integration.
Operational Guidelines & Safety Parameters
Primary Role: Use the relay for scheduled switching and energy tracking. Do not eliminate your existing thermal-magnetic MCB.
Protection Settings: Configure current and voltage thresholds within the Tuya app to trigger automatic cut-offs during power spikes or voltage sags.
Data Interpretation: Treat energy consumption stats (kWh) as an accurate baseline estimate for home management rather than certified metering.
00:00 Smart MCB Tongou TO-Q-SY2-JWT.
00:22 Connect the wiring to the Smart Relay
00:47 Install Smart MCB
01:39 Configure protection Smart MCB
02:41 Smart MCB Wi-Fi signal
The Tongou TO-Q-SY2-JWT is a smart switch designed to bring remote switching and power monitoring to your home automation setup.
While form-factored similarly to a DIN-rail Miniature Circuit Breaker (MCB), it is crucial to understand its primary role: it is a Smart Relay intended for switching, scheduling, and basic telemetry, NOT a main protection MCB for household electrical safety. Always retain your standard circuit breaker for dedicated overcurrent and short-circuit protection.
Technical Specifications & Features
The Tongou TO-Q-SY2-JWT provides comprehensive real-time monitoring and safety parameter configuration via the Tuya app:
Telemetry Monitoring: Live readings for Active Power (W), Energy Consumption (kWh), Line Voltage (V), Current (A), and Internal Device Temperature.
Accuracy Rating: Class 2 metering accuracy with a 2% margin of error. Data readings are designed for monitoring and estimation purposes rather than utility billing.
Smart Protection Controls: Customizable limits for over-current, over-voltage, under-voltage, and thermal protection parameters.
Automation: Support for customized scheduling, countdown timers, and remote ON/OFF toggling.
Step-by-Step Installation & Wiring Guide
Step 1: Pre-Installation Wi-Fi Check
Before mounting the device, verify the 2.4 GHz Wi-Fi signal strength at your circuit breaker box.
Minimum Requirement: The Wi-Fi signal must be at least -70 dBm at the device location.
Signal Threshold: A signal weaker than -75 dBm will lead to frequent offline status and connection dropouts.
Step 2: Physical Wiring
1. Shut off the main power supply before touching any wiring.
2. Route the Live (Phase) and Neutral conductors into their respective input terminals according to the wiring diagram on the device casing.
3. Ensure all terminal screws are securely tightened to avoid high contact resistance.
App Pairing & Configuration (Tuya / Smart Life)
1. Enter Pairing Mode: Turn on the power. Press and hold the front-panel button for 10 seconds until the indicator light flashes rapidly.
2. Device Discovery: Open the Tuya App (or Smart Life app) and select Add Device. The app will automatically detect the Smart Relay.
3. Network Credentials: Enter your local Wi-Fi SSID and password to finalize connection.
4. Device Naming: Rename the device (e.g., "Main Water Heater Relay" or "Outdoor Lighting Switch") for clear identification and voice assistant integration.
Operational Guidelines & Safety Parameters
Primary Role: Use the relay for scheduled switching and energy tracking. Do not eliminate your existing thermal-magnetic MCB.
Protection Settings: Configure current and voltage thresholds within the Tuya app to trigger automatic cut-offs during power spikes or voltage sags.
Data Interpretation: Treat energy consumption stats (kWh) as an accurate baseline estimate for home management rather than certified metering.


![Convert a Google Maps route to GPX file
How to Convert a Google Maps Route to a GPX File (Step-by-Step Guide)
Google Maps is fantastic for planning trips and creating custom routes, but it doesnt natively allow you to download your custom paths as GPX files for offline navigation devices or third-party tracking apps like Strava, Garmin, or Maverick.
Fortunately, you can convert any custom Google Maps route into a GPX file in just a few clicks using free online tools. Here is the step-by-step process as shown in this tutorial video.Step 1: Create and Adjust Your Route on Google Maps
Open Google Maps on your desktop browser.
Enter your starting point and destination to get directions [00:12].
Click and drag the blue route line to customize your path, adding any specific roads or points of interest you want to follow [00:19].
Step 2: Copy the Google Maps Link
Once your route is finalized, click the Menu icon (three horizontal lines) in the top-left corner of the sidebar [00:44].
Select Share or embed map from the menu options [00:46].
In the pop-up window, click COPY LINK [00:53].
Step 3: Convert the Link to a GPX File
Open a new tab and go to a web converter tool like mapstogpx.com [01:03].
Paste your copied Google Maps link into the designated input box [01:12].
Click the LETS GO button [01:15].
The website will automatically process the link and download the generated .gpx file to your computer [01:19].
Step 4: Verify and Use Your GPX File
View online: You can upload the .gpx file to online viewers like vavgpx.com or intergpx.com to verify that your route has been properly converted [01:26].
Mobile Navigation: Transfer the .gpx file to your Android smartphone or GPS device. Open it using GPS mapping applications (such as Maverick) to view and follow your custom route completely offline [01:52]. Convert a Google Maps route to GPX file](https://i.ytimg.com/vi/fEDeJYm_uXw/mqdefault.jpg)







