Uploaded August 2022 | Updated November 2026, 2 days ago
Jockey wheels are one of those parts on your bike that do a lot of work, yet rarely get any love. While you might not think of them as a major component, worn jockey wheels can cause a drop in shift quality and a highly irritating noise; and in the worst-case scenario, an expensive mechanical disaster.
Poor shifting or a noisy drivetrain are both rather irritating. You might have already tried a new chain lube in an attempt to silence the squeak, or changed the shift cables in a bid to improve shifting; but have you considered that those little jockey wheels might be the cause of your drivetrain woes?
Your rear derailleur features an upper and a lower jockey wheel, and these perform different jobs. The upper jockey wheel, also known as the guide pulley, is the one that is in charge of shifting duties. It quite literally guides the chain in the direction that it needs to go when the derailleur makes a shift.
Buy one set pulley, you can enjoy very different shifting.
Once everything is back together you can pop the wheel back into your bike and test the gears. Ideally, you’ll now have a silent system that responds properly to gear adjustments
(Road CC)
Different each Jocky whell marking.
Shimano, Center and Top
SRAM, Bottom
CeramicSpeeed Upper Bottom
00:00 Shape good bad jockey
00:26 Compare damage Shimano pulley
00:45 Center bottom pulley / jockey
01:07 Marking Jockey gear pulley
01:30 Adjust shifter after install Pulley
Maintance Pulley Jockey
Clean from dust, using old toothburhs a good idea
Lubrication
Replace new pulley, no need release the chain.
Jockey wheels are one of those parts on your bike that do a lot of work, yet rarely get any love. While you might not think of them as a major component, worn jockey wheels can cause a drop in shift quality and a highly irritating noise; and in the worst-case scenario, an expensive mechanical disaster.
Poor shifting or a noisy drivetrain are both rather irritating. You might have already tried a new chain lube in an attempt to silence the squeak, or changed the shift cables in a bid to improve shifting; but have you considered that those little jockey wheels might be the cause of your drivetrain woes?
Your rear derailleur features an upper and a lower jockey wheel, and these perform different jobs. The upper jockey wheel, also known as the guide pulley, is the one that is in charge of shifting duties. It quite literally guides the chain in the direction that it needs to go when the derailleur makes a shift.
Buy one set pulley, you can enjoy very different shifting.
Once everything is back together you can pop the wheel back into your bike and test the gears. Ideally, you’ll now have a silent system that responds properly to gear adjustments
(Road CC)
Different each Jocky whell marking.
Shimano, Center and Top
SRAM, Bottom
CeramicSpeeed Upper Bottom
00:00 Shape good bad jockey
00:26 Compare damage Shimano pulley
00:45 Center bottom pulley / jockey
01:07 Marking Jockey gear pulley
01:30 Adjust shifter after install Pulley
Maintance Pulley Jockey
Clean from dust, using old toothburhs a good idea
Lubrication
Replace new pulley, no need release the chain.










