Uploaded July 2018 | Updated November 2026, 3 hours ago
Hello and welcome back to my channel, we have just started a new venture. That being a Market stall, showcasing the items Emma and I make. Emma makes wonderful creations out of Pom Poms. We did our first stall on tuesday 1st July and quickly realised that we needed a better way to display our products. So this is where as a maker, i got to work and built these simple display boxes, I only had two nights as i work full time, so gluing was out of the question, enter the pocket hole joinery.
After passing the planks through the thicknesser, i ripped them all to about 80 mm in width. To save time i went with the length as was (which was around 100 cms), i only needed to trim both ends
I then set the distance on my Trend Pocket hole Jig, to around 2.5 cms off centre, this spreads the joining force over a wider surface.
As i wasn't using glue, i placed the boards into my clamps and set them in position and got busy securing the boards together.
I quickly realised with the thinnest box, i had not refined my thought process and was not able to secure the front and back panels with pocket hole joinery, due to the angle required, nevermind. I changed tack and went for a more tradition screw joint. Whilst this does not give a great aesthetic, the boxes will more than likely be covered.
After the construction was completed, the fun began and by fun i mean sanding, which i did up to 240 grit, ensuring that i smoothed over all the edges to reduce the possibility of splinters occuring
They turned out to be very practical, fulfilling the Brief, given to me by Emma. not the most complicated build, but it works as requested and completed before the deadline.
Thanks for watching, please like, comment, share and subscribe.
I hope you enjoy the video.
Please Follow me on,
Instagram
instagram.com/mgmakes
Facebook
facebook.com/mg.makes.73
Find Me on Etsy
etsy.com/uk/shop/MGmakes1973
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.com/gb/home
Mgmakes@gmail.com
Hello and welcome back to my channel, we have just started a new venture. That being a Market stall, showcasing the items Emma and I make. Emma makes wonderful creations out of Pom Poms. We did our first stall on tuesday 1st July and quickly realised that we needed a better way to display our products. So this is where as a maker, i got to work and built these simple display boxes, I only had two nights as i work full time, so gluing was out of the question, enter the pocket hole joinery.
After passing the planks through the thicknesser, i ripped them all to about 80 mm in width. To save time i went with the length as was (which was around 100 cms), i only needed to trim both ends
I then set the distance on my Trend Pocket hole Jig, to around 2.5 cms off centre, this spreads the joining force over a wider surface.
As i wasn't using glue, i placed the boards into my clamps and set them in position and got busy securing the boards together.
I quickly realised with the thinnest box, i had not refined my thought process and was not able to secure the front and back panels with pocket hole joinery, due to the angle required, nevermind. I changed tack and went for a more tradition screw joint. Whilst this does not give a great aesthetic, the boxes will more than likely be covered.
After the construction was completed, the fun began and by fun i mean sanding, which i did up to 240 grit, ensuring that i smoothed over all the edges to reduce the possibility of splinters occuring
They turned out to be very practical, fulfilling the Brief, given to me by Emma. not the most complicated build, but it works as requested and completed before the deadline.
Thanks for watching, please like, comment, share and subscribe.
I hope you enjoy the video.
Please Follow me on,
instagram.com/mgmakes
facebook.com/mg.makes.73
Find Me on Etsy
etsy.com/uk/shop/MGmakes1973
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.com/gb/home
Mgmakes@gmail.com










