Uploaded June 2018 | Updated November 2026, 2 days ago
Hello and Welcome Back,
Last week I had the privilege of visiting my friend Paul Sharpe Of "Sharpey's Workshop" for a collaboration build, the result was a pair of Rustic Industrial Side Tables.
I have been wanting to learn to weld and for me the best teacher i knew was Paul, We met in person at Makers Central, but have been communicating on line for a little while prior. Paul is an absolutely genuine guy with a lot of patience (he need this, to teach me to weld). Whilst at Makers Central it was agreed that we should get together for a collaboration build, the finish project was left open and to be of my choosing.
I opted for a pair of"simple" side tables and brought the gift of scaffolding planks to Paul's Shop, Paul provided the Metal. Paul has a very similar approach to me with building and that is to use what has been discarded or about to be thrown away and re purpose them into newer items.
We started by cleaning the Scaffolding planks, using a wire brush to remove any dirt and checked for hidden hardware (nails or screws, Ect) once cleaned, we then measured and cut them to lenght.
Then we cut some reclaimed metal roof trusses to lenght (which was about 40 cm), removed any loose paint and unwanted fixings. They were then laid out, ensuring they would sit comfortably around the previously cut scaffold planks and hold them secure.
When we were happy with the sizing, we cut a couple of squares out of each end of two lengths of the metals strips, ready for welding.
This is were i got excited and unfortunately failed to record a lot of me welding as i was concentrating on what Paul was telling me to do and what to look out for.
Anyway, once Paul had shown me what to do, he let me loose with the Arc welder, i found this quite a tricky process, what with making sure the tip was where you wanted it to be, then dropping your mask over your face (to protect your eyes), making contact with the metal, pulling the molten tip slowly along the join to ensure a solid join. was to say the least a little stressful, but very enjoyable.
One thing i didn't take into consideration, was that metal "flexes" when heated, (yes i know how that sounds) and if you are not careful, it will move out of square after you have finished your weld.
As we both made the same item, Paul has kept his and made a video (which is a lot better than mine) i brought mine back to the shedquarters to finish mine of here.
This was an amazing day spent full of laughs and learning with a great guy, Thank you Paul for your time and hospitaliy, i am looking forward to our second collaboration, but this time in the Shedquaters.
thanks for watching
Sharpeys Workshop
youtube.com/results?search_query=sharpey%27s+workshop
Please Follow me on,
Instagram
instagram.com/mgmakes
Facebook
facebook.com/mg.makes.73
Find Me on Etsy
etsy.com/uk/shop/MGmakes1973
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.com/gb/home
Mgmakes@gmail.com
Hello and Welcome Back,
Last week I had the privilege of visiting my friend Paul Sharpe Of "Sharpey's Workshop" for a collaboration build, the result was a pair of Rustic Industrial Side Tables.
I have been wanting to learn to weld and for me the best teacher i knew was Paul, We met in person at Makers Central, but have been communicating on line for a little while prior. Paul is an absolutely genuine guy with a lot of patience (he need this, to teach me to weld). Whilst at Makers Central it was agreed that we should get together for a collaboration build, the finish project was left open and to be of my choosing.
I opted for a pair of"simple" side tables and brought the gift of scaffolding planks to Paul's Shop, Paul provided the Metal. Paul has a very similar approach to me with building and that is to use what has been discarded or about to be thrown away and re purpose them into newer items.
We started by cleaning the Scaffolding planks, using a wire brush to remove any dirt and checked for hidden hardware (nails or screws, Ect) once cleaned, we then measured and cut them to lenght.
Then we cut some reclaimed metal roof trusses to lenght (which was about 40 cm), removed any loose paint and unwanted fixings. They were then laid out, ensuring they would sit comfortably around the previously cut scaffold planks and hold them secure.
When we were happy with the sizing, we cut a couple of squares out of each end of two lengths of the metals strips, ready for welding.
This is were i got excited and unfortunately failed to record a lot of me welding as i was concentrating on what Paul was telling me to do and what to look out for.
Anyway, once Paul had shown me what to do, he let me loose with the Arc welder, i found this quite a tricky process, what with making sure the tip was where you wanted it to be, then dropping your mask over your face (to protect your eyes), making contact with the metal, pulling the molten tip slowly along the join to ensure a solid join. was to say the least a little stressful, but very enjoyable.
One thing i didn't take into consideration, was that metal "flexes" when heated, (yes i know how that sounds) and if you are not careful, it will move out of square after you have finished your weld.
As we both made the same item, Paul has kept his and made a video (which is a lot better than mine) i brought mine back to the shedquarters to finish mine of here.
This was an amazing day spent full of laughs and learning with a great guy, Thank you Paul for your time and hospitaliy, i am looking forward to our second collaboration, but this time in the Shedquaters.
thanks for watching
Sharpeys Workshop
youtube.com/results?search_query=sharpey%27s+workshop
Please Follow me on,
instagram.com/mgmakes
facebook.com/mg.makes.73
Find Me on Etsy
etsy.com/uk/shop/MGmakes1973
A Proud Member of
Small Workshop YouTube Makers Facebook Group
facebook.com/groups/SmallWorkshopYouTubeMakers
Makers Media Network
facebook.com/groups/MakersMediaNetwork
If you would like to Support my work, then please consider leaving me a “tip” in my paypal account - all donations will go towards future projects
paypal.com/gb/home
Mgmakes@gmail.com










