Bisch Basch Bosch | Scheppach OSM600 Belt and Bobbin Sander Fix and Upgrade @BischBaschBosch | Uploaded February 2024 | Updated October 2024, 1 hour ago.
Following on from my initial review of this (gifted) belt and bobbin sander from Scheppach, in this video I fix the belt backing plate making if flat. This being made flat, also made it worthwhile adding a mitre gauge to the table top.
The results of this combination made for some surprisingly accurate results.
And yes, although I'm talking about the Scheppach machine here, the same issue (if it exists) can be fixed for the same machines - as in it's exactly the same! - from other brands including Triton, Clarke, DK Rutlands, Lumberjack, WEN, Holzstar, Bauer (Harbor Frieght), Grizzly, Sealey, Draper and - I think - Aldi/Lidl too.
Links below to the little mitre gauge and the Makita carbon pad I used below.
Mini mitre gauge - ebay.us/3b284Y
Makita Carbon Pad - ebay.us/olsRsi
Following on from my initial review of this (gifted) belt and bobbin sander from Scheppach, in this video I fix the belt backing plate making if flat. This being made flat, also made it worthwhile adding a mitre gauge to the table top.
The results of this combination made for some surprisingly accurate results.
And yes, although I'm talking about the Scheppach machine here, the same issue (if it exists) can be fixed for the same machines - as in it's exactly the same! - from other brands including Triton, Clarke, DK Rutlands, Lumberjack, WEN, Holzstar, Bauer (Harbor Frieght), Grizzly, Sealey, Draper and - I think - Aldi/Lidl too.
Links below to the little mitre gauge and the Makita carbon pad I used below.
Mini mitre gauge - ebay.us/3b284Y
Makita Carbon Pad - ebay.us/olsRsi
![[Gifted] Outside Radius Router cutter. Brilliant AND Terrible!](https://i.ytimg.com/vi/OOUoIsT-bEg/hqdefault.jpg "[Gifted] Outside Radius Router cutter. Brilliant AND Terrible!
This is a router bit that, as soon as Id seen it, wanted it and was already designing furniture pieces in my head to make from it. All it has to do is its job...
Designed to cut a profile into Conti-board/MFC (melamine faced chip board), melamine mdf, plywood and solid woods, when folded 90 degrees, it creates a seamless outside radius.
There are though some challenges to overcome for the router bit to be successful. Are these challenges worth the effort? This I explore in the video and I think the answer is clear.
Thanks to Banggod for sending me the cutter to try.
If youd like to look for yourselves, links are below. Check size options before ordering!
The cutter I used 30mm radius - https://uk.banggood.com/custlink/GG39EMreei?title=30 radius bit
Similar cutter type including 50mm radius - https://uk.banggood.com/custlink/3KDiyzr4gL?title=50 radius bit")
