Uploaded December 2014 | Updated September 2026, 2 hours ago
Here is the Black 52” Retract-A-Gate. This is a difficult area to install a baby gate but in conjunction with some Retract-A-Gate accessories, it is actually quite simple. All of the accessories can be found online at http://www.Retract-A-Gate.com. As you can see, the solution for this installation is a Stair Banister Kit. It was cut to the right height, and zip tied in between two spindles in the railing.
On the wall, the Wall Spacer accessory was utilized because the lower bracket was installed on the baseboard. The upper bracket on the wall needed some spacers behind it so both brackets would be flush with each other. A difficult installation is not so difficult with the help of Retract-A-Gate accessories.
Here is the Black 52” Retract-A-Gate. This is a difficult area to install a baby gate but in conjunction with some Retract-A-Gate accessories, it is actually quite simple. All of the accessories can be found online at http://www.Retract-A-Gate.com. As you can see, the solution for this installation is a Stair Banister Kit. It was cut to the right height, and zip tied in between two spindles in the railing.
On the wall, the Wall Spacer accessory was utilized because the lower bracket was installed on the baseboard. The upper bracket on the wall needed some spacers behind it so both brackets would be flush with each other. A difficult installation is not so difficult with the help of Retract-A-Gate accessories.
